Product Description
ATI AUX46RG is a 46-gallon rectangle gasoline auxiliary tank built from .125" diamond-plate aluminum with full internal baffles. It’s designed to connect into your factory tank through the filler neck using a gasoline auxiliary install kit (sold separately). Standard features include a vent fitting with rollover protection, fuel pickup and return fittings, automotive-style cap, and a 3/8" NPT drain. Tanks are pressure/leak tested and ship clean with welded mounting tabs.
Key Features
- .125" aluminum construction with fully welded baffles.
- Vent fitting with rollover protection; fuel pickup and return fittings.
- Automotive-style filler cap; 3/8" NPT drain; welded mounting tabs.
- Meets requirements in 49 CFR 393.65 for gasoline auxiliary tanks.
- Installation kit not included—order hose/clamp kit, filler-neck adapter, and gauge as desired.
Fitment
Universal pickup-bed fit. Designed to plumb into the OE tank via the filler neck with an auxiliary install kit. Verify bed dimensions and mounting locations before purchase.
Dimensions & Capacity
- Capacity: 46 gallons
- Overall length: 57"
- Overall width: 12"
- Overall height: 16.5" body height (some listings round to 17")
- Notes: Allow additional clearance for cap and mounting tabs.
What’s Included
- ATI AUX46RG 46-gallon aluminum auxiliary tank
- Standard vented cap, pickup/return fittings, 3/8" NPT drain, welded tabs
Install kit, filler-neck adapter, hose/clamp kit, and gauges are sold separately.
Compliance
Gasoline auxiliary models are built to meet Title 49 CFR 393.65 requirements when properly installed. Check local/state regulations.
FAQ
- Does this include the auxiliary install kit?
- No. This listing is the tank only. Order the gasoline hose & clamp kit and 1" filler-neck adapter separately.
- How does the AUX46RG connect to my truck?
- With an auxiliary kit that tees into the factory filler neck. The kit transfers fuel from the aux tank into the OE tank as you drive.
- What are the exact dimensions?
- Plan for 57" L x 12" W x 16.5–17" H. Some retailers list 16.5" body height; others round to 17". Leave clearance for the cap and mounting tabs.
- Is the interior baffled?
- Yes—fully welded baffles reduce slosh and improve stability.
- Is it DOT “refueling” approved?
- No—this is a gasoline auxiliary tank (meets 49 CFR 393.65). If you need to dispense fuel directly to equipment, see ATI refueling (transfer) tanks built under DOT special permits.
