XDP XD322 3/8 INCH STREET PERFORMANCE PUSHRODS FOR 11-19 FORD 6.7L POWERSTROKE ENGINE

Upgrade the weak link in your 2011-2019 Ford 6.7L Powerstroke valvetrain with the XDP Pushrods 3/8 inch Street Performance XD322. At almost 10 inch long, the stock 5/16 inch pushrods in your 6.7L Powerstroke are not adequate for a modified engine.

Increases in valve spring pressures, engine RPM and cylinder pressures can quickly stress your pushrods and push past their physical limits. This causes flex that leads to valvetrain damage and power loss. This flex is not visible to the naked eye and when inspecting the factory pushrods, they normally won't show signs of wear or failure.

This does not mean they shouldn't be replaced. Eliminate the weak point and upgrade your pushrods today! Manufactured to XDP's stringent standards, the XD322 Pushrods are handcrafted by experts using only the highest quality materials.

The 3/8 inch Street Performance Pushrods are manufactured from a seamless 4130/4135 chromoly tubing that is cold drawn over a mandrel for maximum rigidity and strength. The CNC machined tips are made from a 86L20 bar stock that is core hardened and triple tempered for increased impact and wear resistance.

The extra steps in the manufacturing process gives you a stronger and more reliable pushrod that allows you to maximize your valvetrain performance. Sold as a set of 32.

Features:

• Supports 800HP
• 170,000 PSI Tensile Strength
• 4130/4135 Chromoly Construction
• 3/8 inch x .095 inch, 9.548 inch Overall Length

Installation Note: These Pushrods are a direct replacement for the factory pushrods in your engine. Please consult the factory service manual for removal, installation and valve adjustment instructions.

Elevate your 2011-2019 Ford 6.7L Powerstroke's valvetrain with the XDP XD322 3/8 Inch Street Performance Pushrods. Designed specifically for modified engines, these pushrods are a vital upgrade to the stock 5/16 inch options that simply cannot handle the increased stress from enhanced valve spring pressure, higher RPMs, and elevated cylinder pressures. As a result, the original components are prone to flex that can lead to valvetrain issues and performance loss—problems often undetectable until it’s too late.

The XD322 pushrods measure nearly 10 inches in length and feature a robust construction tailored to withstand extreme conditions. Crafted from high-quality seamless 4130/4135 chromoly tubing, each pushrod is cold drawn over a mandrel to ensure optimal rigidity and strength. The CNC machined tips utilize 86L20 bar stock, which is core hardened and triple tempered, significantly increasing impact and wear resistance.

This meticulous manufacturing process not only enhances durability but also promises a significant improvement in valvetrain performance. Rated to support up to 800 horsepower with a remarkable 170,000 PSI tensile strength, this set of 32 pushrods is designed for serious enthusiasts who demand reliability.

Installation is straightforward as these pushrods serve as a direct replacement for factory pieces. It is advisable to refer to the factory service manual for detailed removal, installation, and valve adjustment procedures. Take the step to fortify your engine’s performance and ensure its longevity—the XDP XD322 3/8 Inch Street Performance Pushrods will deliver the reliability and efficiency your Powerstroke engine deserves.