XDP XD204 STREET PERFORMANCE PUSHRODS (3/8 INCH) FOR 98.5-18 DODGE RAM WITH CUMMINS ENGINE

Increase the reliability and performance of the valvetrain in your 1998.5-2018 Dodge 5.9L and 6.7L Diesel with the XDP Street Performance Pushrods (3/8 Inch) XD204. In modified applications, the factory Pushrods are not adequate to handle the stress from increased cylinder pressures, valve spring pressures and higher engine RPM associated with modified engines.

Just because you don't see physical signs of failure with your existing pushrods, does not mean they shouldn't be replaced. Even in mild applications, excessive flexing from your pushrods can cause power loss, and lead to other valvetrain issues and component failures.

The XDP Street Performance Pushrods are handcrafted to XDP's stringent specifications. They feature a 3/8 diameter and are built from only the highest quality seamless 4130/4135 chromoly tubing that is cold drawn over a mandrel to increase rigidity and reduce flex.

The tips are CNC machined from 86L20 bar stock that is core hardened and triple tempered, providing increased impact and wear resistance. These materials and procedures not only extend the life of these pushrods, they improve performance of your valvetrain. Sold as a set of 12.
Features:

• Supports 500HP+
• 170,000 PSI Tensile Strength
• 4130/4135 Chromoly Construction
• Great For Stock To Moderate Builds
• 3/8 Inch x .095 Inch, 11.450 Inch Overall Length

Installation Notes: These Pushrods are a direct replacement for the factory pushrods in your engine. Please consult the factory service manual for removal, installation and valve adjustment instructions.

Enhance the performance and reliability of your valvetrain with the XDP XD204 Street Performance Pushrods designed specifically for 1998.5-2018 Dodge Ram models equipped with 5.9L and 6.7L Cummins engines. Engineered for modified setups, these pushrods are essential for vehicles experiencing increased cylinder pressures, upgraded valve springs, and higher RPMs. Factory pushrods often fall short in handling the demands of high-performance conditions, leading to potential power loss and expensive valvetrain damage.

Crafted to meet rigorous standards, each pushrod in the set of 12 features a robust 3/8-inch diameter made from premium seamless 4130/4135 chromoly tubing. This material is cold drawn over a mandrel to enhance rigidity while minimizing flex—critical factors for maintaining optimal performance in modified engines. The CNC machined tips, derived from core-hardened 86L20 bar stock, offer exceptional wear resistance and durability, ensuring longevity even in the toughest environments.

With a remarkable tensile strength of 170,000 PSI, these pushrods are designed to support power levels exceeding 500 horsepower, making them perfect for both stock and moderately modified builds. Their dimensions (3/8 Inch x .095 Inch, 11.450 Inch Overall Length) ensure a precise fit, allowing for seamless installation as direct replacements for factory components.

Elevate your engine's performance with the XDP XD204 Street Performance Pushrods, where quality materials and meticulous craftsmanship come together to deliver a valvetrain solution that stands the test of time. For best practices, it is recommended to consult the factory service manual for detailed guidance on removal, installation, and valve adjustments, ensuring optimal performance from your upgraded setup.