WEHRLI WCF100628 13-18 DODGE 6.7L CUMMINS OEM PLACEMENT COOLANT TANK KIT

2003-2007 5.9L Cummins High Flow 3.5” Intake Horn and Driver Side Intercooler Pipe Kit. Kit replaces the failure prone 3” plastic OEM intercooler pipe with a 3.5” heavy duty 14g Aluminum intercooler pipe and the OEM cast intake horn (which is necked down to less than 1.5” wide) with a full mandrel bent 3.5” elbow. The 3.5” elbow is welded to a CNC machined aluminum mounting flange (new hardware included) which perfectly matches the WCFAB Intake Spacer Kit for optimum airflow into the cylinder head. Our horn can be used with the OEM grid heater or other brand high-flow intake plates; however, the internal surfaces may not be as perfect of a match as our Billet Intake Spacer kit offers. The CNC machined flange has two incorporated 1/8” pipe thread ports for boost reference or other injectables, and an 8mm threaded port to accept the wire harness isolation clamp to support the OEM wire harness. The 3.5” High Flow Horn also has an incorporated threaded bung to fasten the oil dipstick tube securely. Connecting the Intercooler pipe to the intercooler, and Pipe to Horn, are supplied high quality 5 ply silicone boots and stainless steel t-bolt clamps. No need to reuse any worn-out or torn OEM boots or clamps. The Intake horn and Intercooler Pipe are rounded off with WCFab's high-quality powder coat finish in your color of choice.

Replaces the following MOPAR part numbers: 52028895AE, 52028895AC, 52028895AD, 5086828AA

***2003-2004 models only - This 3.5" intake horn is significantly larger than the stock piece it is replacing. The smooth radius bends on the new part requires the plastic shroud over the throttle assembly on earlier trucks to be trimmed for fitment.***

- 60% greater flow than stock
- 3.5" High Flow Intake Horn & matching 3.5" Intercooler Pipe
- High Quality Aluminum Construction
- Intake Gasket
- Hardware
- Powder Coating
- Silicone Boots
- Stainless T-Bolt Clamps
- 2x 1/8" NPT Ports for Boost Pressure reading or Water Methanol Injection
- Mounting points to retain factory oil dipstick location and wire harness routing
- NO Tuning required, bolt on!

The WEHRLI WCF100628 13-18 DODGE 6.7L CUMMINS OEM PLACEMENT COOLANT TANK KIT is a top-of-the-line upgrade for your 2013-2018 6.7L Cummins engine. Say goodbye to the unsightly plastic coolant reservoir and say hello to our custom powder-coated fabricated aluminum coolant tank with a convenient sight glass.

This kit includes everything you need for a seamless installation, such as a black anodized CNC machined billet aluminum cap, coolant level sight glass, mounting hardware, overflow hose, and a low coolant sensor. Designed to fit stock trucks without the need for additional modifications, this tank utilizes OEM mounting points and can be easily installed using basic hand tools.

Perfectly compatible with both stock and drop-in turbo setups, the tank conveniently fits behind the passenger side battery where the firewall meets the inner fender. By eliminating the support bracket used with the stock plastic tank, this upgrade provides more clearance and better access for aftermarket turbo setups.

Furthermore, the powder coating doesn't just make your engine bay look sleek and stylish; it also offers long-lasting protection from corrosion. Our state-of-the-art powder coating facility ensures exceptional quality control and preparation. With over 30 different colors in stock and the option to choose from 5000 colors through Prismatic Powders, you can customize your coolant tank to match your style and preferences.

Upgrade your engine bay with the WEHRLI WCF100628 coolant tank kit and enjoy enhanced durability, improved aesthetics, and easy installation.