WEHRLI WCF100388 2011-2022 6.7L FORD POWER STROKE 60" TRACTION BAR KIT (CCSB/SCSB)

***This kit includes 60" long bars for Crew Cab Short Bed Models***

***This kit is for 2017-2024 Ford F-250 and F-350 Super Duty Trucks with 4 inch Axle Tube Diameter; Sterling 10.5” and Dana M275”***

Built in house at WCFab carrying a LIFETIME WARRANTY against bending or breaking (to original purchaser). Traction bars are a necessary upgrade when increasing the horsepower on your diesel truck to prevent the axle from twisting which can lead to broken u-joints, driveshafts, and even twisted axle housings. Our traction bar brackets bolt on to the bottom of the axle tube via the axle u-bolts and weld to the frame on the front end. We use a high quality RockJock rebuild-able and grease-able “Johnny Joint” heim connection at the frame to allow for adjustment of torsion on the axle or if you raise/lower the rear of your truck. At the axle connection we use a heavy duty Poly Urethane Bushing for decreased noise and vibration which is common complaint if a solid heim is used on both ends. Grade 8 hardware connects the bars to the mounts on the frame and axle. We complete our traction bar kit with our professional in house powder coat process in your color choice and comes standard with a epoxy Primer base coat before the final color which increases corrosion resistance by more than ten times compared to just your standard powder single coat application.

FITMENT NOTES:

• 2011-2016 Ford F-250 and F-350 Super Cab and Crew Cab Short Bed Please see use WCF100399
• 2017 or newer F-350 or F-450 Dually (DRW) trucks equipped with the Dana M300 rear axle (4.5" diameter axle tubes) please see part number WCF100501 and separate bar options WCF100837 or WCF100839. 
• If you have a Lift Kit and your REAR lift Block is taller than 5" or your total lift height is 6" or greater, use part number WCF100399. If you have a Lift Kit and your U-Bolts face up instead of down like factory, please call for ordering assistance. If your truck is on a big lift, please measure from your axle mounting point to your frame mounting point to ensure the bar length will work properly for your application before placing your order.
• If you have a Regular Cab Long Bed, Super Cab Long Bed, Super Cab Short Bed, or Crew Cab Long Bed truck use part number WCF100399. 

***For Crew Cab Short Bed Models***
-LIFETIME WARRANTY against bending or breaking (to original purchaser)
-60" Heavy Duty Bars
-Poly Bushings
-RockJock Johnny Joints
-Frame side weld on mounts
-Axle side bolt on mounts
-Grade 8 Hardware
-Powder Coating with epoxy primer base coat

The WEHRLI WCF100388 2011-2022 6.7L FORD POWER STROKE 60" TRACTION BAR KIT is a top-tier solution designed specifically for 2011-2022 Ford F-250 and F-350 Super Duty Truck owners seeking to enhance their diesel experience. Crafted in-house at WCFab, this kit sets new standards with a LIFETIME WARRANTY against bending or breaking, reassuring the original purchaser of its quality and durability.

Guaranteeing optimal performance, our traction bars play a pivotal role in preventing axle twist, safeguarding against potential damage to crucial components like u-joints, driveshafts, and axle housings. With our precision-engineered brackets that bolt to the axle tube and weld to the frame, structural integrity is reinforced, ensuring long-term reliability. The use of a Rock Jock "Johnny Joint" heim connection at the frame facilitates easy adjustment for torsion and lift modifications, while heavy-duty Poly Urethane Bushings at the axle connection minimize noise and vibration.

We take pride in our attention to detail, employing high-grade Grade 8 hardware and a professional powder coating process that not only enhances aesthetics but also boosts corrosion resistance significantly. The powder coat finish, cured at elevated temperatures, delivers a durable shield against the elements, promoting longevity and sustained performance.

For seamless compatibility, please refer to the fitment notes to ensure the correct part number for your specific truck model. Our commitment to excellence extends to our powder coating options, with a wide array of standard and two-coat colors available to cater to individual preferences. At Wehrli Custom Fabrication, quality craftsmanship and customer satisfaction are paramount, making us the go-to choice for premium aftermarket upgrades for your Ford Power Stroke.