SYNERGY 8072-01 WELD-ON REAR TRACK BAR BRACKET FOR 07-18 WRANGLER JK/JKU

Synergy Jeep JK Weld-On Rear Track Bar Bracket to replace the thin and weak factory bracket
Fits:

• 07-18 Jeep Wrangler JK
• 07-18 Jeep Wrangler Unlimited JK

Details:

• Synergy JK Weld-On Rear Track-Bar Bracket
• Weld-On rear track-bar bracket designed to replace the weak factory JK track bar bracket
• Replace the thin factory brackets on a stock axle or use for swapping any axle into a JK
• Multiple Track-bar holes for suspension adjustments
• Designed to fit stock JK axle tubes, 3.150 inch diameter
• Will fit other diameter axle tubes with minor trimming
• Track bar relocation bolt holes are 2.900 Inch 3.713 Inch and 4.525 inch above the stock track bar mounting location

Note:

• Requires the use of a minimum 3 inch bump stop spacer for clearance with the exhaust. When using a lower relocation bolt hole or aftermarket exhaust, a shorter bump stop spacer may be used7

DETAILED FITMENT:

• 2007-2010 Jeep Wrangler X
• 2007-2017 Jeep Wrangler Unlimited Rubicon
• 2007-2017 Jeep Wrangler Rubicon
• 2007-2010 Jeep Wrangler Unlimited X
• 2007-2017 Jeep Wrangler Sahara
• 2007-2017 Jeep Wrangler Unlimited Sahara
• 2010-2017 Jeep Wrangler Unlimited Sport
• 2010-2017 Jeep Wrangler Sport
• 2011-2011 Jeep Wrangler 70th Anniversary
• 2011-2011 Jeep Wrangler Unlimited 70th Anniversary
• 2016 Jeep Wrangler 75th Anniversary
• 2016 Jeep Wrangler Sport S
• 2016 Jeep Wrangler Unlimited Sport S
• 2016 Jeep Wrangler Unlimited 75th Anniversary
• 2018 Jeep Wrangler JK Unlimited Rubicon
• 2018 Jeep Wrangler JK Sport
• 2018 Jeep Wrangler JK Unlimited Sahara
• 2018 Jeep Wrangler JK Sahara
• 2018 Jeep Wrangler JK Unlimited Sport
• 2018 Jeep Wrangler JK Rubicon

  Upgrade your Jeep's suspension system with the SYNERGY 8072-01 Weld-On Rear Track Bar Bracket, specifically engineered to enhance performance for 2007-2018 Wrangler JK/JKU models. This robust, weld-on bracket is designed to replace the factory's weak and thin mounting point, ensuring your vehicle maintains stability even under challenging off-road conditions.

  Crafted from high-quality materials, the SYNERGY track bar bracket provides superior strength and durability. This part not only caters to stock axle setups but is also versatile enough for those looking to swap different axles into their JK. With multiple track bar holes, you can easily adjust your suspension settings to suit your driving needs.

  • Compatible with 07-18 Jeep Wrangler JK and Jeep Wrangler Unlimited JK.
  • Weld-on design for utmost strength and long-lasting performance.
  • Multiple track bar holes for precise suspension adjustments.
  • Designed to fit stock JK axle tubes with a diameter of 3.150 inches.
  • Compatible with other diameter axle tubes with minor modifications.
  • Track bar relocation bolt holes positioned at 2.900 inches, 3.713 inches, and 4.525 inches above the stock track bar mounting location.
  • Requires the use of a minimum 3-inch bump stop spacer for exhaust clearance.

  Equip your rig with the SYNERGY 8072-01 Weld-On Rear Track Bar Bracket for improved off-road performance and unmatched reliability. Give your Jeep the upgrade it deserves and conquer the toughest terrains with confidence!