10032 results for '12V Cummins timing gear'

USA ZMG56-12 G56 1ST GEAR MAINSHAFT FOR 2005-2018 DODGE RAM

USA Standard Gear manufactures a full line of top-quality transmission parts. You can count on USA Standard Gear to fulfill all your transmission, differential, and general replacement part needs...

YUKON YPKF9-SG-04 FLAT SIDE GEAR WITHOUT HUB FOR 8 INCH AND 9 INCH FORD WITH 28 SPLINES

Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.Details: Side gear without hub Fits Ford 8 inch and 9 inch Trac Loc positraction with 28...

INDUSTRIAL INJECTION 363240681A VIPER 63 PHATSHAFT TURBO - 2003-2004 DODGE RAM 2500/3500 5.9L CUMMINS

Overview The Industrial Injection Viper 63 PhatShaft is a proven drop-in performance turbo for the 2003-2004 5.9L Cummins. It features a 63mm forged-milled compressor wheel, 68mm turbine, and a...

INTERSTATE-MCBEE M-3910248 BELL HOUSING ADAPTER PLATE PLUG 89-02 5.9L CUMMINS (AFTERMARKET REPLACEMENT)

Interstate-McBee M-3910248 – Bell Housing Adapter Plate Plug (1989–2002 5.9L Cummins) Replacement plug for the bell housing adapter plate on 5.9L Cummins B-series engines. Restores a...

YUKON YG GMBOP-390 HIGH PERFORMANCE RING AND PINION GEAR SET FOR GM 8.2 INCH BUICK OLDSMOBILE AND PONTIAC IN 3.90

Yukon Ring and Pinion sets give you the confidence of knowing you are running gears designed for the harshest of conditions. Whether it is on the street, off-road, or at the track, Yukon ring and...

EXERGY E06 11022 0-2200 BAR (32,000 PSI) RAIL PRESSURE SENSOR FOR 2003-2018 DODGE RAM WITH CUMMINS ENGINE

Restore accurate fuel rail pressure readings on your Cummins truck with the Exergy E06 11022 Rail Pressure Sensor. This 0–2200 bar (up to 32,000 PSI) sensor is engineered for reliability and...

MAHLE HS54774-3 NON EGR (STD) HEAD GASKET SET FOR 07.5-18 CUMMINS 6.7L

Restore OE-level sealing on the 6.7L Cummins with the MAHLE HS54774-3 NON-EGR (STD) head gasket set. Built around a multi-layer steel (MLS) head gasket for clamp-load stability, this complete...

YUKON YGK038 GEAR AND INSTALL KIT PACKAGE FOR STANDARD ROTATION DANA 60 AND 99 AND UP GM 14T 5.13

Yukon gear packages provide an easy way to re-gear a four wheel drive vehicle with one simple part number.Details: Fits standard rotation Dana Spicer 60 and 1999 and up GM 10.5 inch 14 bolt truck 5...

YUKON YG C8.25-321 HIGH PERFORMANCE RING AND PINION GEAR SET FOR 04 AND DOWN CHRYSLER 8.25 INCH IN A 3.21 RATIO

Yukon Ring and Pinion sets give you the confidence of knowing you are running gears designed for the harshest of conditions. Whether its on the street, off-road, or at the track; Yukon ring and...

CUMMINS 4940183 OEM TURBO OIL SUPPLY FITTING (MALE UNION) WITH O-RING – 5.9L & 6.7L

Restore proper oil delivery to your turbocharger with the genuine Cummins 4940183 OEM turbo oil supply fitting (male union) with O-ring. This direct-fit union is designed for the 5.9L and 6.7L ISB...

HAMILTON CAMS 07-S-003 103# VALVE SPRINGS FOR 98.5–18 CUMMINS 5.9L/6.7L 24V

Hamilton 103 lb seat pressure springs are a proven upgrade for high boost/drive pressure and elevated RPM on 24-valve Cummins. They reduce valve float and reversion while maintaining streetable...

USA ZG GM14T-456T GM RING AND PINION THICK GEAR SET 10.5 INCH GM 14 BOLT TRUCK IN A 4.56 RATIO

USA Standard ring and pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring and pinion sets for a variety of common and hard to find...

INDUSTRIAL INJECTION 0433175519-R1 EXTRUDE HONED INJECTION NOZZLE - 2003-2004 DODGE RAM 2500/3500 5.9L CUMMINS - 100HP (25% OVER)

Unlock +100 HP with precise fuel delivery. The Industrial Injection 0433175519-R1 extrude-honed injector nozzle is engineered for the early 2003-2004 5.9L Cummins (old-style injector). Each nozzle is...

YUKON YPKGM8.5-S-30 STANDARD OPEN SPIDER GEAR KIT FOR 8.5 INCH GM WITH 30 SPLINE AXLES

Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.Details: Spider gear kit Fits GM 8.5 inch open differential with 30 spline axles...

ATS 303-031-2464 68RFE ACCUMULATOR &SEPERATOR PLATE KIT FITS 2019+ 6.7L CUMMINS

The ATS 303-031-2464 68RFE Accumulator & Separator Plate Kit is a critical upgrade for 2019+ 6.7L Cummins trucks looking to improve transmission performance, durability, and shift quality...

USA ZG C9.25-355 CHRYSLER GEAR SET RING AND PINION 09 AND DOWN CHRYSLER 9.25 INCH IN A 3.55 RATIO

USA Standard ring and pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring and pinion sets for a variety of common and hard to find...

INDUSTRIAL INJECTION 23D401 DUAL CP3 KIT (KIT ONLY, NO PUMP) - 2007.5-2018 6.7L CUMMINS

Feed big power the right way. The INDUSTRIAL INJECTION 23D401 Dual CP3 Kit adds a second high-pressure pump to your 2007.5-2018 6.7L Cummins so you can maintain target rail pressure under heavy load...

FLEECE FPE-CRR-20-0806 2007.5-2018 CUMMINS REGULATED RETURN FUEL DISTRIBUTION BLOCK

Take control of fuel pressure on your 2007.5-2018 6.7L Cummins with the FLEECE FPE-CRR-20-0806 REGULATED RETURN FUEL DISTRIBUTION BLOCK. This billet fuel distribution block integrates a high-flow 20...

FLEECE FPE-CRTFL-OE 2003-2016 CUMMINS FACTORY OIL FEED LINE REPLACEMENT

Restore and upgrade the lifeline of your turbo with the FLEECE FPE-CRTFL-OE 2003-2016 CUMMINS FACTORY OIL FEED LINE REPLACEMENT. This high-quality replacement line delivers consistent, reliable oil...

YUKON YGK024 GEAR AND INSTALL KIT PACKAGE FOR STANDARD ROTATION DANA 60 AND 88 AND DOWN GM 14T 5.38 RATIO

Yukon gear packages provide an easy way to re-gear a four wheel drive vehicle with one simple part number.Details: Fits standard rotation Dana Spicer 60 and 1988 and down GM 10.5 inch 14 bolt truck...

BOSCH 0445120238 NEW FUEL INJECTOR 04.5-07 CUMMINS 5.9L

BOSCH 0445120238 NEW FUEL INJECTOR 04.5-07 CUMMINS 5.9LDiscover the pinnacle of diesel fuel injection technology with the BOSCH 0445120238 Fuel Injector designed specifically for 04.5-07 Cummins 5.9L...

USA ZG D60-373 DANA 60 GEAR SET RING AND PINION REPLACEMENT DANA 60 IN A 3.73 RATIO

USA Standard ring and pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring and pinion sets for a variety of common and hard to find...

DDP DDP4BTP-3 CUMMINS P-PUMP 4BT STAGE 3 INJECTOR SET DYNOMITE DIESEL

Cummins 4BT with P-Pump New Injector Set: Biggest Street injector recommended. Injectors can support up to 480 RWHP. Modified fuel supply is ideal. Recommended timing 20-22 degrees. Sold as a matched...

YUKON YSPBLT-016 RING GEAR BOLT 3/8X 24 THREAD

Yukon Gear and Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much,...

ATS 304-302-2164 47RH 47RE 48RE BILLET OUTPUT SHAFT FITS 1994-2007 5.9L CUMMINS 29 SPLINE

The ATS 304-302-2164 Billet Output Shaft is a critical upgrade for strengthening the drivetrain in 1994-2007 5.9L Cummins trucks equipped with 47RH, 47RE, or 48RE transmissions. Designed to replace...

ATS 303-007-2326 68RFE BILLET CHANNEL PLATE KIT FITS 2007.5-2011 6.7L CUMMINS

The ATS 303-007-2326 68RFE Billet Channel Plate Kit is a critical upgrade for 2007.5-2011 6.7L Cummins trucks equipped with the 68RFE transmission. Designed to address common hydraulic inefficiencies...

YUKON YSPBLT-030 RING GEAR BOLT FOR TOYOTA T100 TACOMA AND 8 INCH IFS FRONT

Yukon Gear and Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much,...

MAHLE MS-2328H-.026MM H-SERIES MAIN BEARING SET (.26MM) FOR 89-18 CUMMINS 5.9/6.7

Built for high-load Cummins builds, the MAHLE MS-2328H-.026MM H-Series Main Bearing Set delivers race-bred reliability with tri-metal construction, enlarged chamfers for crank fillet clearance, and...

MAHLE MS-2328H-.25MM H-SERIES MAIN BEARING SET (.25MM) FOR 89-18 CUMMINS 5.9/6.7

Build a stronger bottom end with the MAHLE MS-2328H-.25MM H-Series Main Bearing Set for 1989–2018 Cummins 5.9L/6.7L engines. H-Series bearings use a hardened steel back with a thin overlay,...

YUKON YG GMBOP-336 HIGH PERFORMANCE RING AND PINION GEAR SET FOR GM 8.2 INCH BUICK OLDSMOBILE AND PONTIAC IN 3.36

Yukon Ring and Pinion sets give you the confidence of knowing you are running gears designed for the harshest of conditions. Whether it is on the street, off-road, or at the track, Yukon ring and...