10034 results for '12V Cummins timing gear'

MAHLE HS54774-3 NON EGR (STD) HEAD GASKET SET FOR 07.5-18 CUMMINS 6.7L

Restore OE-level sealing on the 6.7L Cummins with the MAHLE HS54774-3 NON-EGR (STD) head gasket set. Built around a multi-layer steel (MLS) head gasket for clamp-load stability, this complete...

YUKON YPKDS110-S-34 REPLACEMENT STANDARD OPEN SPIDER GEAR KIT FOR DANA S110 WITH 34 SPLINE AXLES

Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.Details: Spider gear kit Fit Dana Spicer S110 open differential with 34 spline axles...

USA ZG D44-488 DANA 44 GEAR SET RING AND PINION REPLACEMENT DANA 44 IN A 4.88 RATIO

USA Standard ring and pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring and pinion sets for a variety of common and hard to find...

YUKON YPKGM8.5-S-30 STANDARD OPEN SPIDER GEAR KIT FOR 8.5 INCH GM WITH 30 SPLINE AXLES

Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.Details: Spider gear kit Fits GM 8.5 inch open differential with 30 spline axles...

HAMILTON CAMS 07-S-003 103# VALVE SPRINGS FOR 98.5–18 CUMMINS 5.9L/6.7L 24V

Hamilton 103 lb seat pressure springs are a proven upgrade for high boost/drive pressure and elevated RPM on 24-valve Cummins. They reduce valve float and reversion while maintaining streetable...

MAHLE MS-2328H-.25MM H-SERIES MAIN BEARING SET (.25MM) FOR 89-18 CUMMINS 5.9/6.7

Build a stronger bottom end with the MAHLE MS-2328H-.25MM H-Series Main Bearing Set for 1989–2018 Cummins 5.9L/6.7L engines. H-Series bearings use a hardened steel back with a thin overlay,...

YUKON YGK024 GEAR AND INSTALL KIT PACKAGE FOR STANDARD ROTATION DANA 60 AND 88 AND DOWN GM 14T 5.38 RATIO

Yukon gear packages provide an easy way to re-gear a four wheel drive vehicle with one simple part number.Details: Fits standard rotation Dana Spicer 60 and 1988 and down GM 10.5 inch 14 bolt truck...

MAHLE SS45903 INTAKE VALVE STEM OIL SEAL SET FOR 98.5-02 CUMMINS 5.9L

Stop oil creep past the guides and keep your 24-valve running clean with the MAHLE SS45903 Intake Valve Stem Oil Seal Set for the 1998.5–2002 5.9L Cummins ISB. These OE-style, positive-type...

INDUSTRIAL INJECTION 22A419 DODGE SILVER BULLET TURBO KIT - 2007.5-2009 RAM 2500/3500 6.7L CUMMINS - 69MM

Make big, clean power on your 6.7L Cummins. The INDUSTRIAL INJECTION 22A419 Silver Bullet 69mm kit is built around a forged-milled (FMW) compressor wheel, 74mm turbine, 14cm housing, and a 360°...

INDUSTRIAL INJECTION 0433175519-R1 EXTRUDE HONED INJECTION NOZZLE - 2003-2004 DODGE RAM 2500/3500 5.9L CUMMINS - 100HP (25% OVER)

Unlock +100 HP with precise fuel delivery. The Industrial Injection 0433175519-R1 extrude-honed injector nozzle is engineered for the early 2003-2004 5.9L Cummins (old-style injector). Each nozzle is...

BD DIESEL 1045778 STOCK REPLACEMENT TURBO – 2013–2018 RAM 6.7L CUMMINS HE300VG PICKUP

The BD Diesel 1045778 Stock Replacement Turbo is a direct-fit replacement engineered specifically for 2013–2018 Ram pickup trucks equipped with the 6.7L Cummins diesel. Designed around the...

YUKON YPKF9-S-28-4 STANDARD OPEN SPIDER GEAR KIT FOR AND 9 INCH FORD WITH 28 SPLINE AXLES AND 4-PINION DESIGN

Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.Details: Spider gear kit Fit Ford 8 inch and 9 inch open differential with 28 spline...

USA ZG D60-373 DANA 60 GEAR SET RING AND PINION REPLACEMENT DANA 60 IN A 3.73 RATIO

USA Standard ring and pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring and pinion sets for a variety of common and hard to find...

MAHLE 224-3354WR PISTON WITH RINGS (STD) FOR 01-02 CUMMINS 5.9L HO

Restore factory compression, oil control, and durability with the MAHLE 224-3354WR piston-with-rings set for 2001–2002 Dodge Ram 2500/3500 5.9L Cummins High Output (VIN 7). This standard-bore 4...

S&S DIESEL 6.7C-80SAC-SET 80% OVER INJECTOR SET – NEW – 2007.5–2018 DODGE RAM CUMMINS 6.7L 24V

S&S Diesel 6.7C-80SAC-SET is a brand-new (not reman) 80% over SAC-nozzle injector set engineered for the 2007.5–2018 Dodge Ram 6.7L Cummins 24V. Each set is flow-matched and built to OE...

USA ZG D60R-373R DANA 60 GEAR SET RING AND PINION REPLACEMENT DANA 60 REVERSE ROTATION IN A 3.73 RATIO

USA Standard ring and pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring and pinion sets for a variety of common and hard to find...

BD DIESEL 1409591 CLAMP V-BAND EXHAUST BRAKE/SYSTEM

The BD DIESEL 1409591 Clamp V-Band Exhaust Brake/System is a heavy-duty replacement V-band clamp designed to maintain a tight, secure seal on BD Diesel exhaust brake and exhaust system connections. A...

YUKON YSPTW-001 CHRYSLER 7.25 INCH PINION GEAR THRUST WASHER

Yukon Gear and Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much,...

YUKON YG GMBOP-390 HIGH PERFORMANCE RING AND PINION GEAR SET FOR GM 8.2 INCH BUICK OLDSMOBILE AND PONTIAC IN 3.90

Yukon Ring and Pinion sets give you the confidence of knowing you are running gears designed for the harshest of conditions. Whether it is on the street, off-road, or at the track, Yukon ring and...

EXERGY E06 11022 0-2200 BAR (32,000 PSI) RAIL PRESSURE SENSOR FOR 2003-2018 DODGE RAM WITH CUMMINS ENGINE

Restore accurate fuel rail pressure readings on your Cummins truck with the Exergy E06 11022 Rail Pressure Sensor. This 0–2200 bar (up to 32,000 PSI) sensor is engineered for reliability and...

MAHLE 224-3732WR PISTON SET WITH RINGS (STD BORE) FOR 07.5–18 CUMMINS 6.7L

Restore factory-tight compression and long-haul durability with the MAHLE 224-3732WR standard-bore piston set for the 2007.5–2018 6.7L Cummins ISB. Expansion-controlled pistons with compensated...

ATS 301-021-2326 68RFE BILLET FILTER COUPLER FITS 2007.5+ 6.7L CUMMINS

The ATS 301-021-2326 68RFE Billet Filter Coupler is a critical upgrade for 2007.5+ 6.7L Cummins trucks looking to improve transmission reliability and fluid flow. Designed to replace the weak factory...

CPP DIESEL WATER PUMP FOR 2013-2018 RAM WITH 6.7L CUMMINS ENGINE

CPP's line of new heavy-duty water pumps are backed by our 24-month unlimited mileage warranty. Our pumps are quality engineered according to the OEM's design and assembled with high-performance...

USA ZIKGM8.5-S-30 SPIDER GEAR SET GM 8.5 INCH 30 SPLINE

USA Standard spider gear kits offer OEM replacement quality at a low price. Spider gear kit Fits GM 8.5 inch 30 spline open differential Includes two side gears, two pinion gears, cross pin shaft,...

YUKON YG GMBOP-336 HIGH PERFORMANCE RING AND PINION GEAR SET FOR GM 8.2 INCH BUICK OLDSMOBILE AND PONTIAC IN 3.36

Yukon Ring and Pinion sets give you the confidence of knowing you are running gears designed for the harshest of conditions. Whether it is on the street, off-road, or at the track, Yukon ring and...

MAHLE MS-2328H-.026MM H-SERIES MAIN BEARING SET (.26MM) FOR 89-18 CUMMINS 5.9/6.7

Built for high-load Cummins builds, the MAHLE MS-2328H-.026MM H-Series Main Bearing Set delivers race-bred reliability with tri-metal construction, enlarged chamfers for crank fillet clearance, and...

BD DIESEL 1040186 P7100 DELIVERY VALVE KIT FOR DODGE RAM 2500/3500 1994–1998 5.9L 12-VALVE ENGINE

The BD DIESEL 1040186 P7100 Delivery Valve Kit is a performance upgrade designed for the 1994–1998 Dodge Ram 2500/3500 5.9L 12-valve Cummins engine equipped with the P7100 mechanical injection...

USA ZG D44-354 DANA 44 GEAR SET RING AND PINION REPLACEMENT DANA 44 IN A 3.54 RATIO

USA Standard ring and pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring and pinion sets for a variety of common and hard to find...

DDP DDP4BTP-3 CUMMINS P-PUMP 4BT STAGE 3 INJECTOR SET DYNOMITE DIESEL

Cummins 4BT with P-Pump New Injector Set: Biggest Street injector recommended. Injectors can support up to 480 RWHP. Modified fuel supply is ideal. Recommended timing 20-22 degrees. Sold as a matched...

YUKON YPKGM7.625-S-28 STANDARD OPEN SPIDER GEAR KIT FOR LATE 7.625 INCH GM WITH 28 SPLINE AXLES

Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.Details: Spider gear kit Fits GM 7.625 inch open differential with 28 spline axles...