4406 results for 'Exergy 6.7L injector'

BD DIESEL 1050157 INJECTOR INSTALL KIT DODGE 6.7L CUMMINS COMMON RAIL 2007.5–2018 RAM 2500/3500/4500/5500

The BD DIESEL 1050157 Fuel Injector Installation Kit is the all-in-one solution for a clean, complete injector install on 2007.5–2018 Ram 6.7L Cummins common rail trucks. When you’re...

FLEECE FPE-FL-CUMM-6.7-1 07.5-18 6.7L DODGE CUMMINS NUMBER 1 INJECTION LINE

Replacement high pressure fuel lines from Fleece Performance.  These are a direct replacement for your cracked, broken, or leaking injector lines.  Replaces Cummins part number 4935981 on cylinder 1...

XDP XD491 REMAN 6.7 FUEL INJECTOR KIT (CYLINDERS 1-2-7-8) FOR 15-19 FORD SUPERDUTY WITH 6.7L POWERSTROKE ENGINE

Swap out the faulty injector in your 2015-2019 Ford 6.7L Powerstroke with an XDP Remanufactured Fuel Injector With Bolt and Line (Cylinders 1-2-7-8) XD491. XDP has over 30 million fuel injectors on...

XDP XD481 REMAN 6.7 FUEL INJECTOR KIT (CYLINDERS 3-4-5-6) FOR 11-14 FORD SUPERDUTY WITH 6.7L POWERSTROKE ENGINE

Replace the failed injector in your 2011-2014 Ford 6.7L Powerstroke with the XDP Remanufactured Fuel Injector With Bolt and Line (Cylinders 3-4-5-6) XD481. With over 30 million fuel injectors on the...

EXERGY E07 20012 2000 BAR 29000 PSI RAIL PRESSURE RELIEF VALVE FOR 2003-2007 DODGE RAM WITH 5.9L CUMMINS ENGINE

Stabilize common-rail pressure and prevent early venting with the Exergy E07 20012 PRV. This 2000 BAR (29,000 PSI) rail pressure relief valve is calibrated by Exergy Performance for the...

EXERGY E06 11024 0-2400 BAR (34000psi) RAIL PRESSURE SENSOR FOR 2003-2018 DODGE RAM WITH CUMMINS ENGINE

The EXERGY E06 11024 is a high-performance rail pressure sensor designed specifically for 2003-2018 Dodge Ram models equipped with the renowned Cummins engine. With a measurement range from 0 to 2400...

EXERGY E06 10251 NEW STOCK REPLACEMENT FUEL RAIL-RIGHT 2004.5-2005 GM DURAMAX 6.6L LLY

Restore OE rail pressure and reliability on your LLY with the Exergy E06 10251 Right (Passenger-Side) Fuel Rail. This new stock-replacement rail is built to Exergy’s exacting standards for...

DTECH DT671006 FUEL INJECTION LINE (CYLINDERS 1-2-7-8) 2011-2019 FORD 6.7L POWERSTROKE

The DTECH DT671006 Fuel Injection Line for Cylinders 1-2-7-8 in 2011-2019 Ford 6.7L Powerstroke vehicles is a top-quality product designed to enhance your vehicle's fuel system performance. Crafted...

EXERGY E04 10409 14MM STROKER CP3 PUMP - RACE SERIES (LBZ BASED) 2007.5-2010 GM DURAMAX 6.6L LMM

Build a serious LMM fuel system with the Exergy E04 10409 14mm Stroker CP3 Pump – Race Series. This LBZ-based single CP3 is engineered for high horsepower Duramax builds, delivering massive...

INDUSTRIAL INJECTION 0433172145-R3 DODGE EXTRUDE HONED INJECTION NOZZLE - 2007.5-2012 RAM 2500/3500 6.7L CUMMINS - 180HP

Wake up your 6.7L Cummins with the Industrial Injection 0433172145-R3 Extrude Honed Nozzle (180HP). Precision-honed orifices improve atomization and flow so your tuner and fuel system can deliver...

INDUSTRIAL INJECTION 0433172145-R2 EXTRUDE-HONED NOZZLES — 2007.5–2012 RAM 2500/3500 6.7L CUMMINS — ~125 HP

Unlock ~125 HP* gain on your 6.7L Cummins with Industrial Injection’s 0433172145-R2 extrude-honed injector nozzles for 2007.5–2012 Ram 2500/3500. Each genuine-OE nozzle is precision...

XDP XD613 FUEL SYSTEM CONTAMINATION KIT WITHOUT PUMP FOR 17-19 FORD SUPERDUTY WITH 6.7L POWERSTROKE ENGINE

The XDP Fuel System Contamination Kit - No Pump (Stock Replacement) XD613 will help you get back up and running in your 2017-2019 Ford 6.7L Powerstroke. The CP4 injection pump in the Super Duty...

CPP DIESEL FUEL INJECTOR FEED TUBES FOR 2003-2018 CUMMINS 5.9L/6.7L 24V ENGINE

BRAND NEW FUEL CONNECTOR TUBE SET SET OF 6 INCLUDES ORINGS AFTERMARKET REPLACEMENT FOR CUMMINS 2871188 Enhance the performance and efficiency of your 2003-2018 Dodge Cummins 5.9L/6.7L 24V engine...

XDP XD612 FUEL SYSTEM CONTAMINATION KIT WITHOUT PUMP FOR 15-16 FORD SUPERDUTY WITH 6.7L POWERSTROKE ENGINE

The XDP Fuel System Contamination Kit - No Pump (Stock Replacement) XD612 will help you get your 2015-2016 Ford 6.7L Powerstroke back up and running. The OE CP4 injection pump in the Super Duty...

EXERGY E05 20015 STOCK REPLACEMENT RAIL PRESSURE SENSOR FOR 2003-2018 DODGE RAM WITH CUMMINS ENGINE

The EXERGY E05 20015 Stock Replacement Rail Pressure Sensor is designed specifically for Dodge Ram models with Cummins engines manufactured between 2003 and 2018. This high-performance sensor plays a...

INDUSTRIAL INJECTION 0433172370-R5 DODGE EXTRUDE HONED INJECTION NOZZLE FOR 13-18 6.7L CUMMINS 53LPM

Industrial Injection 0433172370-R5 Extrude-Honed Injector Nozzle - 2013-2018 Ram 2500/3500 6.7L Cummins - 53 LPM Deliver race-level fueling with street-smart precision. The Industrial Injection...

EXERGY E07 20010 1800 BAR 26000 PSI RAIL PRESSURE RELIEF VALVE FOR 2003-2007 DODGE RAM WITH 5.9L CUMMINS ENGINE

The EXERGY E07 20010 1800 BAR (26,000 PSI) Rail Pressure Relief Valve is the ultimate solution for enhancing the performance of your 2003-2007 Dodge Ram equipped with a 5.9L Cummins engine...

XDP XD516 FUEL CONTAMINATION KIT FOR 17-19 FORD SUPERDUTY WITH 6.7L POWERSTROKE ENGINE

Get the XDP 6.7L Powerstroke Fuel Contamination Kit XD516 and repair the fuel system in your 2017-2019 Ford 6.7L Powerstroke after a failed CP4 pump. When the CP4 pump fails in your 6.7L Powerstroke,...

MAHLE VS50658 VALVE COVER GASKET SET FOR 11–20 FORD POWERSTROKE 6.7L

Restore a leak-free top end on your 2011–2020 6.7L Power Stroke with the MAHLE VS50658 complete left + right valve cover gasket set. Built to OE standards with beaded-steel gaskets and molded...

EXERGY E05 20005 INLET METERING VALVE (FCA/MPROP) FOR 2003-2007 DODGE RAM WITH CUMMINS 5.9 24V

Fix erratic rail pressure, surging, and idle lope on your 5.9L with the Exergy E05 20005 Inlet Metering Valve (FCA/MPROP). Purpose-built by Exergy Performance for CP3-equipped 2003–2007 Dodge...

DORMAN 904-464 DIESEL EXHAUST FLUID (DEF) INJECTOR 2011-2016 FORD 6.7L POWESTROKE| 2015-2019 FORD TRANSIT 250/350 3.2L POWERSTROKE

Keep the diesel emissions system in top running condition by replacing the diesel exhaust fluid (DEF) injector. Extreme temps and contaminants can foul the DEF injector, leading to engine warning...

INDUSTRIAL INJECTION 0433172370-R2 EXTRUDE HONED INJECTION NOZZLE - FITS 2013-2018 RAM 2500/3500 6.7L CUMMINS - 30 LPM / +125 HP

Step up your 6.7L Cummins fueling the right way. The Industrial Injection 0433172370-R2 Extrude Honed Injection Nozzle is engineered for 2013-2018 RAM 2500/3500 6.7L trucks and flows approximately...

INDUSTRIAL INJECTION 0433172145-R4 EXTRUDE HONED INJECTION NOZZLE - 2007.5-2012 RAM 2500/3500 6.7L CUMMINS - 250HP (R4) - ALT: 350HP (R5)

Wake up your 6.7L Cummins with Industrial Injection's 0433172145-R4 extrude-honed injector nozzle. Engineered for balanced flow and crisp atomization, the R4 nozzle supports ~250 HP over stock when...

INDUSTRIAL INJECTION 0433172145-R5 DODGE EXTRUDE HONED INJECTION NOZZLE - 2007.5-2012 RAM 2500/3500 6.7L CUMMINS - ~350 HP

Wake up your 6.7L Cummins with INDUSTRIAL INJECTION's extrude-honed performance nozzle for the 2007.5-2012 Ram 2500/3500. The 0433172145-R5 tip increases fuel delivery for quicker spool, stronger...

DORMAN 904-278 FUEL INJECTION LINE (CYLINDERS 3-4-5-6) 2011-2019 FORD 6.7L POWERSTROKE

This replacement fuel injector line is precision-engineered to match the fit and design of the original fuel injector line on specific vehicles. It comes with any vehicle-specific mounting hardware...

FLEECE FPE-FL-CUMM-6.7-45 07.5-18 6.7L RAM 2500/3500 CUMMINS NUMBER 4 AND NUMBER 5 INJECTION LINE

Replacement high pressure fuel lines from Fleece Performance.  These are a direct replacement for your cracked, broken, or leaking injector lines.  Replaces Cummins part number 4935974 on cylinders 4...

FASS NDTSF20180F140G NO-DROP KIT 140GPH FOR 2023–2024 FORD POWERSTROKE 6.7L

Maximize fuel system reliability and simplify installation on your 2023–2024 Ford F-250/F-350 6.7L Power Stroke with the FASS NDTSF20180F140G No-Drop Kit (140 GPH). This bundle pairs a Titanium...

DORMAN 904-277 FUEL INJECTION LINE (CYLINDERS 1-2-7-8) 2011-2019 FORD 6.7L POWERSTROKE

This replacement fuel injector line is precision-engineered to match the fit and design of the original fuel injector line on specific vehicles. It comes with any vehicle-specific mounting hardware...

XDP XD599 FUEL SYSTEM CONTAMINATION KIT STOCK REPLACEMENT FOR 20-22 FORD SUPERDUTY WITH 6.7L POWERSTROKE ENGINE

Get the XDP Fuel System Contamination Kit (Stock Replacement) XD599 and restore the fuel system in your 2020-2022 Ford 6.7L Powerstroke. When a CP4 injection pump fails in the Ford F-250/350/450/550,...

FLEECE FPE-FL-CUMM-6.7-6 07.5-18 6.7L RAM 2500/3500 CUMMINS NUMBER 6 INJECTION LINE

Replacement high pressure fuel lines from Fleece Performance.  These are a direct replacement for your cracked, broken, or leaking injector lines.  Replaces Cummins part number 4935976 on cylinder 6...