S&B FILTERS 88-0008 CLEANING KIT PRECISION II CLEANING AND OIL KIT RED OIL OILED

Maximize your air filter's performance and extend its lifespan with the S&B Filters 88-0008 Precision II Cleaning and Oil Kit. Specifically designed for S&B filters, this versatile kit is also compatible with 95% of other high-performance air filters, making it an essential addition to any automotive enthusiast's toolkit.

The Precision II Cleaning and Oil Kit features a specially formulated red oil that ensures optimal filtration efficiency. Its simple yet effective cleaning process starts by removing debris from the filter and housing using a clean, soft rag. For larger particles, gently tapping the filter against a hard surface is recommended, and a soft brush can be used for additional cleaning power.

Included in the kit is S&B’s powerful filter cleaner, designed to break down dirt and grime without damaging the filter material. After applying the cleaner, a gentle rinse with low-pressure water will help restore your filter to its peak condition. Once cleaned, it’s crucial to allow the filter to dry for at least 24 hours, ensuring that it is completely free of moisture before re-oiling.

The application of red oil is made easy with the included fill applicator. Start by applying the oil evenly around the circumference of the filter, beginning halfway from the base and making 2-3 passes. This method guarantees a thorough and even distribution of oil, preventing any dry spots. After letting the oil bleed for 20-30 minutes, a quick inspection will confirm that the filter is fully prepped for optimal performance.

With the S&B Filters Precision II Cleaning and Oil Kit, you’ll maintain the efficiency of your air filter, ensuring that your engine breathes freely and performs at its best. Enjoy a cleaner, more efficient ride with this essential maintenance solution.

Precision II Cleaning and Oil Kit Red Oil Maximize the performance and longevity of your air filter. Works on any S&B filter and 95 percent of all other high performance air filters.

Remove and Clean sealing area of filter and filter housing with a Clean soft rag.

Tap the filter on a hard surface to remove and loosen large paricles and debris. (A soft brush may be used to loosen large particles of debris or bugs.)

Use S&B's Filter Cleaner to Clean the filter. Gently rinse out the Cleaner using low pressure water.

Let filter dry for at least 24 hours. Fill and Apply Fill applicator with exact amount of oil required for your filter. Starting 1/2 way from base make 2-3 passes around the circumfrence of the filter in the same area.

Repeat this process evenly spacing out the passes. Inspect and Install Allow oil to bleed for 20-30 minutes.Inspect the filter for any white areas the oil did not cover. With the remaining oil in the applicator apply a small amount of oil to those white areas. Do Not over oil your filter.
Details:

• Filter Type Oiled
• Oil Color Red