PUSHER INTAKES
PUSHER PRC1318MW 3.5" MEGA INTAKE W/ PASS SIDE INTERCOOLER TUBE 2013-2018 DODGE CUMMINS 6.7L 24V
(No reviews yet)
Write a Review
- SKU:
- PRC1318MW
- MPN:
- PRC1318MW
- Shipping:
- Calculated at Checkout
Description
The Pusher 67KIT3GWHP 3.5" MEGA Intake w/ Pass Side Intercooler Tube for your 2013-2018 Dodge 6.7L Cummins is built around a 3.5" inlet that smoothly transitions to two 3" mandrel bent tubes. This design also enabled the use of a short bolt in place of the long driver-side flange bolt that passes right through the center of the stock manifold air plenum. Thus freeing up airflow even more yet maintaining the stock six bolt pattern for a proper seal. The twin tube design nearly doubles the outlet size of the stock manifold while minimizing the impact of the initial section of the number one injector line.
These design features amount to a 49.4% increase in flow over the factory manifold. With this vast improvement over the stock manifold you can expect quicker turbo spool, lower EGT's, and less over all strain on your motor. This manifold also includes instructions, a polished stainless dipstick mount, port plugs, a factory Cummins gasket and hardware to make installing this intake extremely easy.
The Pusher intercooler tubes are built around 3.5" mandrel bent .060" thick tubing. These tubes help optimize your factory intake plumbing by replacing the stock 2.75" ID driver and passenger-side tube. This kit also includes heavy duty 4-ply silicone couplers and stainless T-bolt clamps to make installing these tubes extremely easy. When using this kit, you do not have to try and cut the factory steel bands off the factory tubes in order to save the factory boots. Just loosen the factory clamps and install the supplied parts.
FEATURES:
- By replacing your restrictive factory system with a Pusher Intake System, you can expect results of:
- Faster turbo spool
- .5-1 MPG increase
- Significant gain in throttle response
- 50-200 degree Fahrenheit drop in EGT's
Application Note:
Aftermarket tuning and other supporting modifications are required for installation
Related Products
Related Products
PUSHER PRC1318BT 3.5" MEGA DRIVER SIDE INTERCOOLER TUBE 2013-2018 DODGE CUMMINS 6.7L 24V
PUSHER INTAKES
$219.99
Description Our 3.5" MEGA passenger side intercooler tube for Cummins 6.7L turbo diesel engines is a perfect compliment to the 3.5" Pusher MEGA Intake System. It's fully tig-welded, and utilizes...
PUSHER PRC1318HP 3.5" MEGA PASSENGER SIDE INTERCOOLER TUBE 2013-2018 DODGE CUMMINS 6.7L 24V
PUSHER INTAKES
$219.99
Our 3.5" MEGA passenger side intercooler tube for Cummins 6.7L turbo diesel engines is a perfect compliment to the 3.5" Pusher MEGA Intake System. It's fully tig-welded, and utilizes mandrel-bent...
PUSHER PDC9802MW 3.5" MEGA INTAKE SYSTEM W/ PASS SIDE INTERCOOLER TUBE 1998.5-2002 DODGE CUMMINS 5.9L 24V
PUSHER INTAKES
$629.99
The 3.5" MEGA Intake System replaces all of the 3” factory pre and post intercooler plumbing and intake manifold with 3.5” mandrel bend tubing. It replaces all of your factory boots and clamps with...
PUSHER PDC0709HP 3.5" MEGA PASSENGER SIDE INTERCOOLER TUBE 2007.5-2009 DODGE CUMMINS 6.7L 24V
PUSHER INTAKES
$199.99
Our 3.5" MEGA passenger side intercooler tube for Cummins 6.7L turbo diesel engines is a perfect compliment to the 3.5" Pusher MEGA Intake System. It's fully tig-welded, and utilizes mandrel-bent...
PUSHER PRC1012BT 3.5" MEGA DRIVER SIDE INTERCOOLER TUBE 2010-2012 DODGE CUMMINS 6.7L 24V
PUSHER INTAKES
$199.99
The Pusher 3.5" MEGA Driverside Intercooler tube replaces your factory 2.4" ID plastic intake plumbing, greatly increasing both airflow and durability. Our 3.5" MEGA passenger side intercooler tube...