PPE 515504005 5.0 INCH TO 4.0 INCH X 5.0 INCH L 6MM 5-PLY REDUCER

Drag racing and sled pulling places huge stress on your trucks silicone hoses in a very short period of time. >PPEs hoses were designed to handle the rigors of increased pressure during racing and competition. They are equally proficient at daily driving and towing heavy loads.

Each PPE Performance Silicone Hose is strengthened with 5 plies of polyester reinforced fibers making them very tough. The Fluorocarbon lining offers better lubricity (slippery and resistant to chemicals) and the silicone rubber construction ensures that they can withstand constant boost pressures from -76 degrees all the way to plus 437 degrees Fahrenheit. In short, PPE Performance Silicone Hoses will not blow out like a stock hose will.

>PPEs Silicone Hoses are resistant to fuel, oil and chemicals while also being UV and Ozone resistant. These hoses can handle the extreme exposure that heavy usages puts upon them. With multiple sizes and configurations, there is a PPE Performance Silicone Hose for every design application.
Features:

• 5 Inch To 4 Inch ID x 5 Inch Long Performance Silicone Reducer - Straight (515504005)
• Handles high-boost pressures
• Working pressure: 70 psi - Bar 4.8
• Burst pressure: 207 psi - Bar 14.3
• Higher flow and better lubricity than rubber
• UV and Ozone resistant
• Fluorocarbon lining resistant to oil, fuel and high temperatures
• 6mm wall thickness 5-ply
• Black with PPE Logo
• Sold Individually

Note:

• Due to the 6mm wall thickness of PPE Silicone, hose clamps must be 1/2 inch larger diameter than hose ID for proper fit

Transform your drag racing and sled pulling experience with the PPE 515504005 5.0 inch to 4.0 inch x 5.0 inch L silicone reducer. Designed to withstand the extreme demands of competition, this high-performance silicone hose is perfect for both racing enthusiasts and everyday drivers.

Crafted for durability and efficiency, the PPE Performance Silicone Hose is engineered with 5 plies of polyester reinforced fibers, making it incredibly tough and reliable. The Fluorocarbon lining enhances lubricity and resistance to chemicals, allowing it to handle constant boost pressures between -76 degrees to 437 degrees Fahrenheit without failure. Say goodbye to blown stock hoses and hello to performance you can trust!

• 5 Inch To 4 Inch ID x 5 Inch Long Performance Silicone Reducer - Straight (515504005)
• Handles high-boost pressures with ease
• Working pressure: 70 psi - Bar 4.8
• Burst pressure: 207 psi - Bar 14.3
• Provides higher flow and superior lubricity compared to rubber
• UV and Ozone resistant for increased longevity
• Fluorocarbon lining resists oil, fuel, and high temperatures
• 6mm wall thickness for exceptional strength (5-ply)
• Stylish black finish with PPE Logo
• Sold Individually for customized installations

With a variety of sizes and configurations available, the PPE Performance Silicone Hose meets any design application. Upgrade your vehicle's performance and durability today with this essential component that delivers unrivaled reliability and efficiency.