PPE 515302203 3.0 INCH TO 2.25 INCH X 3 INCH L 6MM 5-PLY REDUCER

Drag racing and sled pulling places huge stress on your trucks silicone hoses in a very short period of time. >PPEs hoses were designed to handle the rigors of increased pressure during racing and competition. They are equally proficient at daily driving and towing heavy loads.

Each PPE Performance Silicone Hose is strengthened with 5 plies of polyester reinforced fibers making them very tough. The Fluorocarbon lining offers better lubricity (slippery and resistant to chemicals) and the silicone rubber construction ensures that they can withstand constant boost pressures from -76 degrees all the way to plus 437 degrees Fahrenheit. In short, PPE Performance Silicone Hoses will not blow out like a stock hose will.

>PPEs Silicone Hoses are resistant to fuel, oil and chemicals while also being UV and Ozone resistant. These hoses can handle the extreme exposure that heavy usages puts upon them. With multiple sizes and configurations, there is a PPE Performance Silicone Hose for every design application.
Features:

• 3 Inch To 2.25 Inch ID x 3 Inch Long Performance Silicone Reducer - Straight (515302203)
• Handles high-boost pressures
• Working pressure: 70 psi - Bar 4.8
• Burst pressure: 207 psi - Bar 14.3
• Higher flow and better lubricity than rubber
• UV and Ozone resistant
• Fluorocarbon lining resistant to oil, fuel and high temperatures
• 6mm wall thickness 5-ply
• Black with PPE Logo
• Sold Individually

Note:

• Due to the 6mm wall thickness of PPE Silicone, hose clamps must be 1/2 inch larger diameter than hose ID for proper fit

PPE 515302203 is the ultimate solution for high-performance enthusiasts seeking reliability and durability in silicone hoses. Specifically designed for drag racing and sled pulling, this 3.0 inch to 2.25 inch x 3 inch long silicone reducer offers a robust performance that stands up to the intense demands of racing while still being suitable for everyday driving and towing heavy loads.

Constructed with 5 plies of polyester reinforced fibers, the PPE Performance Silicone Hose sets a high standard for toughness. It features a Fluorocarbon lining that provides exceptional lubricity and a resistance to chemicals, making it perfectly tuned to withstand consistent boost pressures between -76 degrees and 437 degrees Fahrenheit. Unlike standard hoses, PPE hoses are engineered to resist blowing out, ensuring that your vehicle remains in optimum working condition regardless of stress levels.

• 3 Inch To 2.25 Inch ID x 3 Inch Long Performance Silicone Reducer - Straight (515302203)
• Handles high-boost pressures
• Working pressure: 70 psi - Bar 4.8
• Burst pressure: 207 psi - Bar 14.3
• Higher flow and better lubricity than rubber
• UV and Ozone resistant
• Fluorocarbon lining resistant to oil, fuel and high temperatures
• 6mm wall thickness 5-ply
• Black with PPE Logo
• Sold Individually

For optimal performance, remember that due to the 6mm wall thickness, hose clamps must be 1/2 inch larger in diameter than the hose ID. Choose PPE 515302203 for a silicone hose that truly meets the demands of high-performance driving!