PPE 315903300 6MM 5PLY SILICONE HOSE FORD 6.0L

Drag racing and sled pulling places huge stress on your truck's silicone hoses in a very short period of time. PPE's hoses were designed to handle the rigors of increased pressure during racing and competition. They are equally proficient at daily driving and towing heavy loads.

Each PPE Performance Silicone Hose is strengthened with 5 plies of polyester reinforced fibers making them very tough. The Fluorocarbon lining offers better lubricity (slippery and resistant to chemicals) and the silicone rubber construction ensures that they can withstand constant boost pressures from -76 degrees all the way to +437 degrees Fahrenheit. In short, PPE Performance Silicone Hoses will not blow out like a stock hose will.

PPE's Silicone Hoses are resistant to fuel, oil and chemicals while also being UV and Ozone resistant. These hoses can handle the extreme exposure that heavy usages puts upon them. With multiple sizes and configurations, there is a PPE Performance Silicone Hose for every design application.

Note: Due to the 6mm wall thickness, hose clamps must be 1/2 inch larger diameter than hose ID for proper fit.
Features:

• 6mm 5-ply Silicone Hose - Ford 6.0 liter
• Working pressure: 70 psi - Bar 4.8
• Burst pressure: 207 psi - Bar 14.3
• Higher flow and better lubricity than rubber
• UV and Ozone resistant
• Fluorocarbon lining resistant to oil, fuel and high temperatures
• 5-ply, 6mm wall thickness

Unleash the true potential of your Ford 6.0L engine with the PPE 315903300 6MM 5PLY Silicone Hose. Designed specifically for the demands of drag racing and sled pulling, these silicone hoses are engineered to endure the extreme pressures faced during high-performance competitions while proving reliable for everyday driving and heavy towing.

PPE's Performance Silicone Hose stands out with its robust 5-ply construction reinforced with durable polyester fibers, making it particularly resilient against the harsh conditions of racing. The advanced Fluorocarbon lining provides exceptional lubricity, ensuring superior performance while resisting chemicals that can damage standard hoses. With a temperature range of -76°F to +437°F, these hoses are built to withstand demanding operating environments without blowing out like typical hoses.

• 6mm 5-ply Silicone Hose - Ford 6.0 liter
• Working pressure: 70 psi (4.8 Bar)
• Burst pressure: 207 psi (14.3 Bar)
• Higher flow and improved lubricity compared to rubber hoses
• Resistant to UV rays and ozone degradation
• Fluorocarbon lining that resists oil, fuel, and high temperatures
• Ultra-durable 5-ply construction with 6mm wall thickness

Experience peace of mind with PPE Performance Silicone Hoses, created to handle rigorous use while providing optimal flow performance. Upgrade your truck's cooling system with hoses that promise reliability and efficiency, ensuring your engine performs at its best.