PPE 218034200 1989-1998 DODGE CUMMINS 5.9L 12V HEAD STUD KIT

Engine builders understand the need for high-strength holding power and fasteners that are precision-engineered to handle the extreme stresses that high-performance diesel engines produce. The PPE Head Stud Kit exceeds the industry standards required by performance engines. PPE Head Studs are precision center-less ground for accuracy.

Threads rolled to Mil-S-8879 specifications for increased strength while reducing stress at the threads.
Whether on the highway, off-road, strip, or street, confidence comes from knowing these Head Studs exceed your needs. Highly recommended for boost levels 45 psi and higher. With an independently tested and verified tensile strength of over 231,900 psi, these Studs outperform even the most venerable manufacturer.

Kits come complete with hardened parallel washers, nuts, and specially formulated assembly grease for uniform load distribution and accurate torque readings.

Kit contents:

• (6) 96mmL (M12-1.25) (M12-1.75) short studs
• (14) 146mmL (M12-1.25) (M12-1.75) medium studs
• (6) 200mmL (M12-1.25) (M12-1.75) long studs
• (6) M8-1.25x75mmL Flange Bolts (15mmOD) Requires 12 pt, 10mm socket
• (26) M12-1.25 Flange Nuts (21mmOD) Requires 12pt, 14mm socket
• (26) M12 Flat washers (22mmOD)
• (1) Grease Pack - thread lubricant

Upgrade your performance engine with the PPE 218034200 Head Stud Kit, designed specifically for 1989-1998 Dodge Cummins 5.9L 12V engines. This premium kit is engineered to withstand the extreme pressures and demands of high-performance diesel applications, ensuring unparalleled strength and reliability.

PPE's head studs provide the essential holding power needed for significant boosts, rated for levels of 45 psi and higher. With a significant tensile strength of over 231,900 psi, these fasteners are built to outlast and outperform standard options, guaranteeing that your engine remains secure under intense stress. The precision center-less grinding of the studs ensures accuracy while the threads are rolled to Mil-S-8879 specifications to enhance strength and minimize stress.

• (6) 96mmL (M12-1.25) (M12-1.75) short studs
• (14) 146mmL (M12-1.25) (M12-1.75) medium studs
• (6) 200mmL (M12-1.25) (M12-1.75) long studs
• (6) M8-1.25x75mmL Flange Bolts (15mmOD) Requires 12 pt, 10mm socket
• (26) M12-1.25 Flange Nuts (21mmOD) Requires 12pt, 14mm socket
• (26) M12 Flat washers (22mmOD)
• (1) Grease Pack - thread lubricant

Each kit comes complete with hardened parallel washers, nuts, and a specially formulated assembly grease to ensure uniform load distribution and precise torque readings. For engine builders and performance enthusiasts alike, the PPE Head Stud Kit is a must-have for relentless performance and peace of mind on any road or track.