PPE 115901000 SILICONE HOSE 1+2-BLACK FOR 11-16 GM DURAMAX 6.6L LML

Each PPE Performance Silicone Hose is strengthened with 5 plies of Nomex reinforced fibers making them very tough. Fluorocarbon lining offers better lubricity (slippery and resistant to chemicals) and the silicone rubber construction ensures they can withstand constant boost pressures and temperatures from -76 degrees all the way to +437 degrees Fahrenheit. PPE silicone will maintain structural integrity even when subject to high boost pressures throughout the temperature range. In short, PPE Performance Silicone Hoses will not blow out as a stock hose will.

PPE’s Silicone Hoses are resistant to fuel, oil, and chemicals while also being UV and Ozone resistant. These hoses can handle the extreme exposure that heavy usage puts upon them. With multiple sizes and configurations, there is a PPE Performance Silicone Hose for every design application.

Drag racing and sled pulling place huge stress on your truck’s silicone hoses in a very short period of time. PPE’s hoses were designed to handle the rigors of increased pressures during racing and competition. Their performance tolerances make them an excellent upgrade for your daily driving and the extremes of towing heavy loads.

Note: Due to the 6mm wall thickness, hose clamps must be 1/2 inch larger in diameter than hose ID for proper fit.

GM Equivalent P/N: AKE98909

Features:

• Working pressure: 70 psi - BAR 4.8
• Burst pressure: 207 psi - BAR 14.3
• UV and Ozone resistant
• Handles high boost-pressures, oil and fuel, high-temperatures
• Higher flow and better lubricity than rubber
• 5-ply, 6mm wall thickness

VEHICLE FITMENT: 

Rev up your truck's performance with the PPE 115901000 Silicone Hose designed specifically FOR the FOR 11-16 GM Duramax 6.6L LML engine. Whether you're tearing up the track in a drag race or hauling heavy loads, this silicone hose from PPE is engineered to endure the extreme stress and pressure that racing and competition demand.

Crafted with 5 plies of reinforced polyester fibers, these performance Silicone Hoses are built to be tough and durable. The Fluorocarbon lining provides superior lubricity and resistant to chemicals, while the silicone rubber construction ensures that these hoses can withstand intense boost pressures ranging from -76°F to +437°F. Say goodbye to worries about blowouts, as these hoses are designed to outperform stock hoses.

Not only are PPE's Silicone Hoses robust, but they are also resistant to fuel, oil, and chemicals, as well as UV and ozone exposure. With their ability to handle high boost pressures, oil, fuel, and high temperatures, these hoses are ready FOR any challenge. Available in various sizes and configurations, you can find the perfect PPE performance Silicone Hose FOR your specific design application.

FOR optimal fit, remember that due to the 6mm wall thickness, hose clamps must be 1/2 inch larger in diameter than the hose ID. With a working pressure of 70 psi and a burst pressure of 207 psi, these hoses offer reliability and performance under demanding conditions. Upgrade your truck with the PPE Silicone Hose and experience higher flow, better lubricity, and unmatched durability FOR your GM Duramax 6.6L LML engine.