PPE 114053120 ENGINE OIL PAN GM 6.6L L5P 2020+ BLACK

PPE solves the GM Duramax L5P complete oil drainage problem. During regular oil changes, the stock GM pan retains over half a quart of the dirtiest, heaviest part of the oil which settles to the bottom of the valley of the stock pan. This old oil is trapped in the valley of the stock pan and never drains out. It immediately contaminates your fresh oil.

PPE solves that filthy problem with a flat, angled bottom, designed for more complete drainage. The PPE pan's higher volume holds an additional two quarts of oil. Your engine's fluid capacity is increased, as well as its thermal stamina, which creates a longer service life. Engine temperatures are further reduced because the PPE L5P Oil Pan is constructed of thick, cast aluminum alloy, designed with internal ribs that add strength and rigidity. Plus, we've tapped the side with a convenient NPT port if you want to run a temperature sensor.

A powerful neodymium magnet-equipped, billet, the hardened stainless steel drain plug is included to pull ferrous metals out of your oil before they can damage the internals. An O-ring is also included, to ensure a tight seal.

Replace your factory-stamped steel oil pan and get rid of that dirty oil that you've been holding on to. Give your L5P a fresh, clean start with this simple bolt-on upgrade.

Recommendation Disclaimer: Replace with a new copper washer after each service.

Part # 114052002 14mm Copper Washer

• Engine Oil Pan GM 6.6L L5P 2020+
• Black

PPE 114053120 Engine Oil Pan is specifically designed for the GM 6.6L L5P models from 2020 onwards, providing solutions to common oil drainage issues faced by Duramax engine owners.

The innovative design of this oil pan addresses the problem of dirty oil accumulation in the stock GM pan. Traditional pans trap over half a quart of contaminated oil during changes, jeopardizing the quality of your new oil. The PPE oil pan features a flat, angled bottom that allows for complete drainage, ensuring every last drop of old oil is removed.

• Innovative flat and angled design for maximum oil drainage
• Increased oil capacity—holds an additional 2 quarts
• Constructed from thick cast aluminum alloy for strength and thermal efficiency
• Internal ribs enhance durability and prevent warping under heat
• Convenient NPT port for temperature sensor installation
• Includes a neodymium magnet-equipped, billet stainless steel drain plug
• Comes with an O-ring for a secure seal during operation

Make the switch from the factory-stamped steel oil pan to the PPE 114053120 Oil Pan and enjoy improved engine performance and longevity. With every service, remember to replace your copper washer for optimal results. Upgrade your L5P today and experience cleaner oil with every change!