PPE 114053100 ENGINE OIL PAN GM 6.6L L5P 2020+ RAW

PPE solves the GM Duramax L5P complete oil drainage problem. During regular oil changes, the stock GM pan retains over half a quart of the dirtiest, heaviest part of the oil which settles to the bottom of the valley of the stock pan. This old oil is trapped in the valley of the stock pan and never drains out. It immediately contaminates your fresh oil.

PPE solves that filthy problem with a flat, angled bottom, designed for more complete drainage. The PPE pan's higher volume holds an additional two quarts of oil. Your engine's fluid capacity is increased, as well as its thermal stamina, which creates a longer service life. Engine temperatures are further reduced because the PPE L5P Oil Pan is constructed of thick, cast aluminum alloy, designed with internal ribs that add strength and rigidity. Plus, we've tapped the side with a convenient NPT port if you want to run a temperature sensor.

A powerful neodymium magnet-equipped, billet, the hardened stainless steel drain plug is included to pull ferrous metals out of your oil before they can damage the internals. An O-ring is also included, to ensure a tight seal.

Replace your factory-stamped steel oil pan and get rid of that dirty oil that you've been holding on to. Give your L5P a fresh, clean start with this simple bolt-on upgrade.

Recommendation Disclaimer: Replace with a new copper washer after each service.

Part # 114052002 14mm Copper Washer

• Engine Oil Pan GM 6.6L L5P 2020+
• Raw

The PPE 114053100 Engine Oil Pan for GM 6.6L L5P 2020+ is the ultimate solution for improving your engine's performance and longevity. Designed to address the common issue of oil retention in stock GM pans, this innovative oil pan ensures that you are not contaminating your fresh oil with the dirtiest, heaviest remnants of old oil.

Engineered with a flat, angled bottom, the PPE oil pan facilitates complete oil drainage, eliminating the risk of trapped oil that can harm engine performance. Its upgraded design boasts an increased fluid capacity by an additional two quarts, enhancing both the thermal stability of your engine and its overall service life. Constructed from thick, durable cast aluminum alloy, the PPE pan features internal ribs for added strength, ensuring it withstands the toughest conditions.

• Compatible with GM 6.6L L5P models from 2020 onward
• Designed for optimal oil drainage with a flat, angled bottom
• Increases engine oil capacity by an additional two quarts
• Thick, cast aluminum construction for enhanced durability and thermal performance
• Convenient NPT port for temperature sensor installation
• Includes a high-quality neodymium magnet-equipped drain plug
• O-ring included for a reliable, leak-proof seal

Transform your factory-stamped steel oil pan and eliminate the dirty oil retention problem today. With a simple bolt-on installation, the PPE 114053100 Engine Oil Pan gives your L5P a fresh, clean start, ensuring optimal engine performance and reliability.