Product Description
Clean, simple, louder. The MBRP MDAL017 17" Muffler Delete Pipe replaces the factory muffler on 2007.5–2008 Ram 2500/3500 trucks equipped with the 6.7L Cummins. Built from heavy-duty aluminized steel in MBRP’s Installer Series, it’s a direct, clamp-on solution to free up flow and sharpen exhaust tone.
- 17" overall length, 4" diameter, aluminized steel construction
- Clamp-on install; includes (2) 4" band clamps
- Purpose-built for 6.7L Cummins Ram (2007.5–2008)
Fitment
- 2007.5–2008 Ram 2500/3500, 6.7L Cummins, 2WD/4WD
- Replaces the muffler section in 4" exhaust configurations using a 17" can length
- Verify your system uses 4" connections and a 17" muffler body before ordering
What’s Included
- (1) MBRP 17" Muffler Delete Pipe (aluminized)
- (2) 4" band clamps
Cross-Reference / Alternatives (MBRP-only)
If your system needs a different length or material, consider these MBRP options:
- MBRP GP016 30" MUFFLER DELETE PIPE (4")
- MBRP MDA30 30" 4" MUFFLER BYPASS — ARMOR LITE (ALUM.)
- MBRP MDA36 36" 4" MUFFLER BYPASS — ARMOR LITE (ALUM.)
- MBRP MDS9531 31" 5" MUFFLER BYPASS — ARMOR PLUS (T409)
Helpful Notes
- Aluminized steel is value-focused; in wet/salty climates, periodic inspection is recommended.
- Ensure local regulations and intended vehicle use are compatible with an exhaust muffler delete.
This MDAL017 is spec’d around the 2007.5–2008 6.7L Ram with a 17" muffler section. Some aftermarket systems on later years may use different can lengths and pipe routing — measure your system and choose the correct length from the Cross-Reference list above.
What diameter clamps does it use?
Standard 4" band clamps are used on both ends (included).
Is welding required?
No. It’s a clamp-on install for systems using 4" slip joints. Welding is optional.
