null
MAHLE

MAHLE HS54887 ENGINE HEAD GASKET SET FOR 2011-2014 FORD SUPERDUTY WITH 6.7L POWERSTROKE ENGINE

(No reviews yet) Write a Review
SKU:
MCIHS54887
MPN:
HS54887
Shipping:
Calculated at Checkout
$625.95
724-785-4022

Description

The MAHLE HS54887 is a comprehensive head gasket set designed for the 2011–2014 Ford 6.7L Powerstroke diesel engines, commonly found in Ford Super Duty trucks. This set is engineered to meet or exceed original equipment (OE) specifications, ensuring reliable sealing and performance during engine rebuilds or head gasket replacements.

 Key Specifications

  • Cylinder Head Gaskets: Multi-Layer Steel (MLS) construction for enhanced durability and sealing.

  • Valve Stem Seals: Made from Fluoroelastomer (FPM) for superior heat resistance.

  • Valve Cover Gaskets: Beaded steel design to prevent oil leaks.

  • Intake Manifold Gaskets: Rubber material for a secure seal.

  • Exhaust Manifold Gaskets: MLS construction to withstand high temperatures.

  • Throttle Body Gasket: Beaded steel for a tight seal.

  • Fuel Injector O-Rings: Included for proper fuel system sealing.

  • Cylinder Head Dowels: Included to ensure correct alignment during installation.

  • Timing Cover Gasket: Not included in this set.

  • Cylinder Head Bolts: Not included; must be purchased separately.

  • Water Pump Gasket: Not included in this set.

Vehicle Fitment

This head gasket set is specifically designed for the following vehicles:

  • Ford Super Duty (2011–2014)

  • Ford F-250 (2011–2014)

  • Ford F-350 (2011–2014)

  • Ford F-450 (2011–2014)

  • Ford F-550 (2011–2014)

It is compatible with the 6.7L Powerstroke diesel engine used in these models.

 What's Included

The HS54887 set provides all necessary gaskets and seals required to remove and replace the cylinder head(s) on the engine, ensuring a complete and secure seal. However, it does not include cylinder head bolts, fuel injector lines, or timing cover gaskets.

 Additional Notes

  • Cylinder Head Bolts: These are torque-to-yield bolts and should be replaced during head gasket installation.

  • Installation: Proper installation is crucial; ensure all surfaces are clean and free of debris before sealing.

  • Torque Specifications: Follow the manufacturer's torque specifications and sequence for cylinder head bolts to ensure even pressure distribution.

 

Taxable Yes
Harmonized Tariff Code (Schedule B) 8484100000
SDR Required Flag No
Warranty Time UOM Months
Warranty Time 12
Country of Origin (Primary) Taiwan
Life Cycle Status Code Available to Order

 

Grade Type Standard Replacement
Exhaust Manifold Gasket Material Multi-Layered Steel
Intake Manifold Gasket Material Molded Rubber
Valve Stem Seals Included Yes
Fuel Injector O-Rings Yes
Throttle Body Gasket Included Yes
Valve Cover Gasket Material Beaded Steel
Timing Cover Gaskets/Seal Included No
Item Grade OEM Standard
Cylinder Head Gasket Included Yes
Intake Manifold Gasket Included Yes
Cylinder Head Dowel Included Yes
Fuel Pump Gasket Included Yes
Throttle Body Gasket Material Beaded Steel
Water Pump Gasket Included No
Valve Cover Gasket Included Yes
Valve Stem Seal Material Fluoroelastomer
Exhaust Manifold Gasket Included Yes
Cylinder Head Bolts Included No
EGR Valve Gasket Included Yes
Package Quantity 130
Cylinder Head Gasket Material Multi-Layered Steel
Additional Package Contents Contains CAC Tube Seals, Crankcase Breather Gaskets, Cylinder Head Dowel Pins, EGR Bypass Gasket, EGR Cooler Core Gasket, EGR Cooler to EGR Cooler Housing O-Rings, EGR Cooler to Valve Cover Seals, EGR Valve Gasket, EGR Inlet Tube Gaskets, EGR Outlet Tube Gaskets, Exhaust Manifold Gaskets, Fuel Injector to Valve Cover Seals, Fuel Injector Return Port O-Rings, Fuel Injector Body O-Rings, Fuel Injector Crush Washers, Fuel Injector Hold Down Bolts, Head Gaskets, Heater Hose Inlet Tube O-Ring, Intake Manifold Gaskets, Low Pressure Fuel Line to High Pressure Pump O-Rings, Oil Filler Tube O-Ring, Radiator Hose Seals, Rocker Arm Manifold O-Rings, Thermostat Housing Seal, Throttle Body Gasket, Turbocharger Up-Pipe Gaskets, Turbocharger Adaptor Oil Feed O-Rings, Turbocharger Mounting Gasket, Turbocharger Pedestal Gasket, Turbocharger V-Band Clamps, Vacuum Pump Mounting Gasket, Valve Cover Gaskets, Valve Stem Seals, Water Crossover Gaskets

 

Type of package Smallest Pack (Consumer Level)
Quantity per packing unit 72
package level GTIN 00639789137418
Height (Inch) 3.125
Width (Inch) 12.25
Length (Inch) 25
weight (Pounds Gross) 7.961

 

The MAHLE HS54887 Engine Head Gasket Set is expertly crafted for 2011–2014 Ford Super Duty trucks equipped with the robust 6.7L Powerstroke diesel engine. Designed to match or exceed original equipment specifications, this head gasket set delivers reliable sealing and enhanced performance, ideal for engine rebuilds or head gasket replacements.

Constructed with high-quality materials, the set includes multi-layer steel (MLS) cylinder head gaskets, ensuring exceptional durability and sealing capability. The valve stem seals are made from a superior fluoroelastomer (FPM) material, offering excellent heat resistance, while the beaded steel design of the valve cover gaskets effectively prevents oil leaks.

This comprehensive kit features rubber intake manifold gaskets and MLS exhaust manifold gaskets, both engineered to endure high temperatures without compromising their integrity. Additionally, the throttle body gasket and fuel injector O-rings included in the set ensure optimal fuel system sealing, contributing to overall performance efficacy.

To facilitate a seamless installation, cylinder head dowels are provided, guaranteeing correct alignment. However, it's essential to note that cylinder head bolts must be purchased separately, as they are torque-to-yield and should be replaced during installation for a reliable seal.

While the HS54887 set contains all necessary gaskets and seals for cylinder head removal and replacement, it does not include water pump gaskets or timing cover gaskets. This product is designed for compatibility with various Ford models, including the F-250, F-350, F-450, and F-550, all from the years 2011-2014. With meticulous attention to detail, the MAHLE HS54887 set is your go-to solution for ensuring your Ford Super Duty’s engine is sealed securely, enhancing its reliability and longevity.

View AllClose

Videos

View AllClose

0 Reviews

View AllClose

Related Products

Related Products