INTERSTATE MCBEE
INTERSTATE-MCBEE M-3283335 HEAD GASKET 89–98 5.9L CUMMINS 12-VALVE (AFTERMARKET REPLACEMENT)
- SKU:
- MCBM-3283335
- MPN:
- M-3283335
- Shipping:
- Calculated at Checkout
Description
Interstate-McBee M-3283335 Head Gasket – 89–98 5.9L Cummins 12-Valve (Standard Thickness)
OEM-style standard thickness head gasket engineered for the 1989–1998 Dodge Ram 2500/3500 5.9L Cummins 12-valve (6BT). Built to factory dimensions for reliable sealing and long service life on stock or mildly upgraded engines.
- Direct replacement: Matches Cummins 3283335 (standard thickness) specifications.
- Precision construction: Robust fire-ring and coolant/oil passage geometry for consistent clamp load.
- Aftermarket value: Interstate-McBee quality at a lower cost than OEM boxed parts.
- Right application: Designed for 12-valve (1989–1998) — not for 1998.5–2002 24-valve ISB.
Specifications
Interstate-McBee P/N | M-3283335 |
---|---|
OEM Cross-Reference | Cummins 3283335 (STD thickness) |
Thickness (pre-crush) | ~0.086 in (≈2.18 mm) |
Engine Family | Cummins B-Series 5.9L 12-valve (6BT) |
Position | Cylinder head to block |
Alternates | 3283337 (+0.25 mm), 3283339 (+0.50 mm) for machining/RA conditions |
Vehicle Fitment
Always confirm by engine serial number (ESN) for best results.
- Dodge Ram 2500/3500, 5.9L Cummins 12-valve
- 1989–1993 6BT 12V
- 1994–1998 6BT 12V (P-pump)
Note: For 1998.5–2002 24-valve ISB, use the correct 24V head gasket.
Installation Tips
- Check head/block flatness and surface finish (RA) before installation; correct as needed.
- Use new head bolts or quality studs; follow the Cummins torque and angle sequence exactly.
- Re-torque/heat-cycle only if specified by your fastener manufacturer.
Why Buy From CPP Diesel
- Diesel experts with B-series focus and ESN-verified fitment support.
- Fast shipping and easy returns.
- Great bundle options with studs, upper gasket sets, and coolant additives.
FAQ
Is this the correct gasket for my 1996 5.9L 12-valve?Yes. M-3283335 (STD) fits 1989–1998 12-valve 5.9L Cummins applications when standard thickness is specified.
What if my head/block was milled?
If material has been removed, consider oversize thickness options (e.g., 3283337 +0.25 mm or 3283339 +0.50 mm). Measure piston protrusion and follow Cummins guidance.
Will this work on a 24-valve (1998.5–2002)?
No. This SKU is for 12-valve 6BT (’89–’98). Use the proper 24V ISB head gasket for 1998.5–2002 applications.
Do I need new head bolts/studs?
Highly recommended. Stock torque-to-yield bolts should not be reused. Studs improve clamp consistency, especially on tuned engines.