Product Description
Interstate-McBee M-102408 Turbo Exhaust Outlet-to-Elbow V-Band Clamp – 2019–2024 Ram 6.7L Cummins
OEM-style V-band clamp that secures the turbocharger exhaust outlet to the cast elbow on 2019–2024 Ram 2500/3500/4500/5500 trucks equipped with the 6.7L Cummins diesel. Built as an aftermarket replacement to match OE function and sealing performance.
- Direct-fit replacement: Matches Cummins 102408 application for EPA-era 6.7L ISB/QSB platforms.
- Secure, leak-free seal: Maintains exhaust energy and turbo efficiency at the turbo outlet.
- Service-friendly: Ideal when servicing turbos, elbows, or downpipes; replace worn or deformed clamps.
- Aftermarket value: Interstate-McBee quality at a lower cost than OE-boxed parts.
Specifications
| Interstate-McBee P/N | M-102408 |
|---|---|
| OE Reference | Cummins 102408; Mopar 68450996AA (turbo-to-cast elbow) |
| Location | Turbocharger exhaust outlet → cast elbow |
| Engine | 6.7L Cummins ISB (Ram HD) |
| Includes | (1) V-band clamp |
Vehicle Fitment
Always confirm by VIN/ESN for edge-case builds and mid-year changes.
- Ram 2500/3500/4500/5500 with 6.7L Cummins Turbo Diesel
- Model Years: 2019–2024 (standard & high-output trims as equipped)
Install Notes
- Inspect mating flanges for nicks/warpage; replace clamp if stretched, corroded, or deformed.
- Align V-band evenly; tighten per the Cummins/Mopar service manual torque and recheck after heat cycles.
- Do not lubricate threads unless specified by service procedures.
Why Buy From CPP Diesel
- Verified B-series/ISB fitment help from real diesel techs.
- Fast shipping and easy returns.
- Great pricing on Interstate-McBee and complementary hardware.
FAQ
Does M-102408 fit all 2019–2024 Ram HD 6.7L trims?Yes—it's listed for Ram 2500/3500/4500/5500 with the 6.7L Cummins turbo diesel where the turbo outlet is clamped to the cast elbow. Always verify by VIN/ESN for special packages.
What are the OE cross-references?
Cummins 102408. Common Mopar cross is 68450996AA for the turbo-to-cast elbow joint on late-model Ram HD.
Is this clamp reusable?
If a clamp has been over-torqued, heat-cycled excessively, or shows corrosion/deformation, replace it. Reuse only when condition and tension remain within spec per service manual guidance.
Where is this installed?
At the turbocharger exhaust outlet, securing the connection to the cast elbow (rear of turbo) on the 6.7L Cummins.
