Product Description
Step up your early-'99 7.3L Power Stroke with Industrial Injection's AB-code Race 1 / 120cc reman HEUI injector. Built with new plungers, nozzles/nozzle springs, and OE-spec seal kits, each unit is remanufactured and precision-calibrated for ~50-60 HP over stock with crisp fueling and towing-friendly manners.
Fitment
- Ford 7.3L Power Stroke AB injector code, model years 1998-early 1999 (up to 12/07/1998 build date)
- F-250 / F-350 / Excursion (early) with single-shot AB code injectors
Notes: Many 1997 trucks are AA code. Some California-emissions trucks may use AB-verify your valve-cover injector code/build date before ordering.
What's Included
- (1) Remanufactured AB-code HEUI injector - Race 1 / 120cc
- OE-style internal & external O-rings installed
Core & Order Terms
- Sold individually (order 8 for a complete set)
- Exchange/core required - AB core of the same style
Why This Injector
- ~50-60 HP over stock in a balanced, tow-capable package
- Remanufactured with new critical internals and OE-spec clearances
- Calibrated for consistent cylinder-to-cylinder delivery
Recommended Parts (CPP Internal Links)
- Shop 7.3L Power Stroke Parts
- 7.3L Fuel Injectors & Components
- Injector O-Ring/Seal Kits
- HPOP / IPR support parts
- Fuel supply upgrades (regulator, filters, lines)
Helpful Install Notes
- Confirm AB code & build date ≤ 12/07/1998. Late-'99+ trucks use AD/AE split-shot injectors.
- Change oil & filters, prime fuel, and run contribution test after install.
- Consider an oil-side health check (HPOP/ICP/IPR) on high-mileage trucks.
FAQ
How much power gain should I expect?Race 1 / 120cc typically adds about 50-60 HP over stock with good drivability for towing and daily use.
Will these fit my 1999 truck?If your build date is on or before 12/07/1998 (early '99) and you have AB code single-shot injectors, yes. Late '99-2003 trucks are usually AD/AE split-shot.
Do I need tuning?Tuning is not strictly required for mild use, but a quality 7.3L calibration helps maximize power, smoke control, and EGTs.
Is a core required?Yes-an acceptable AB-code core is required for exchange pricing.
| Specifications for INDUSTRIAL INJECTION ABPSR1 | |
|---|---|
| Brand | Industrial Injection |
| Part Number | ABPSR1 |
| GTIN | Not specified |
| UPC | Not specified |
| Engine Compatibility | 1998–early 1999 Ford 7.3L Power Stroke (AB code single-shot), up to 12/07/1998 build date |
| Configuration | Remanufactured HEUI Injector — Race 1 / 120cc (≈50–60 HP over stock) |
| Country of Origin | Not specified |
| Core Charge | $150 (refundable per supplier policy) |
| Shipping Weight | ~4 lb (single injector) |
| Package Dimensions | 11" × 5" × 3" |
| Shipping Method | Standard Ground (parcel) |
| Prop 65 Warning | This product can expose you to chemicals including lead and chromium, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. Learn more. |
