INDUSTRIAL INJECTION 3642406512 DODGE VIPER PHATSHAFT 64 TURBO FOR 2004.5-2007 5.9L CUMMINS

The original PhatShaft is the perfect turbo for quick spool and low end performance. The Phat Shaft turbo also has the overall volume for overall torque for efficient full throttle power.

The PhatShaft can be purchased with a 12 or 14 turbine housing matched with a 65mm turbine. We suggest a 12 cm turbine housing if the engine is a 12 Valve and has moderate fueling upgrades such as 300hp injectors and a camplate.

If the engine has heavier fueling upgrades such as large injectors, aggressive cam plate and high rev governor springs then you will be better suited with 14cm housing. The benefit of the 14cm exhaust housing is lower Exhaust Gas Temperatures.

However with the 14cm housing, you will get a slightly slower response. The original PhatShaft is available in three different compressor sizes, 62mm, 64mm and 66mm. All three compressors have extended tip technology.

The waste gate is set at 40psi to prevent head gasket failure on the PhatShaft 62 and 45psi on the PhatShaft 64 and 66. All PhatShaft turbochargers are equipped with dual grooved bearings and an adjustable boost elbow.

The Industrial Injection 3642406512 Dodge Viper PhatShaft 64 Turbo, specifically designed for 2004.5-2007 5.9L Cummins engines, sets a new standard in turbo performance. Known for its quick spool time and exceptional low-end power, the original PhatShaft turbo is engineered for enthusiasts who demand unrivaled torque and full-throttle efficiency.

Available with either a 12 or 14 cm turbine housing, this turbo pairs seamlessly with a 65mm turbine, making it a versatile choice for different fueling configurations. For those with a 12 Valve engine and moderate performance upgrades, such as 300hp injectors and a camplate, the 12 cm turbine housing is ideal. It ensures rapid response without compromising efficiency. Conversely, the 14 cm housing caters to heavily modified setups, accommodating larger injectors and aggressive tuning. This configuration helps maintain lower Exhaust Gas Temperatures (EGTs), critical for high-performance applications, although it does exhibit a slightly slower spool.

The PhatShaft comes in three compressor sizes—62mm, 64mm, and 66mm—each equipped with extended tip technology for improved airflow and efficiency. Designed with reliability in mind, the wastegate settings are calibrated to prevent head gasket failure, operating at 40psi for the 62 and 45psi for the larger 64 and 66.

Every PhatShaft turbo is constructed with dual grooved bearings and an adjustable boost elbow, ensuring durability and adaptability under intense conditions. Elevate your Cummins’ capabilities with the Industrial Injection PhatShaft 64 Turbo, where cutting-edge engineering meets performance enhancement, allowing you to unleash the full potential of your truck.