Product Description
Industrial Injection 23G404 Performance Fuel Plate Kit #8 – 1994–1998 Dodge Ram 2500/3500 5.9L 12V Cummins
Unlock reliable horsepower and torque gains on your 12-valve Cummins by upgrading the P7100 injection pump with the Industrial Injection #8 Fuel Cam Plate kit. The 23G404 includes the #8 plate and install hardware, engineered for crisp throttle response and stronger mid-range pull on 1994–1998 Dodge Ram 2500/3500 5.9L 12V Cummins trucks.
Why It Works
- Proven fueling increase: A performance-ground cam (#8 profile) precisely controls rack travel in the P7100 for added fuel delivery and power.
- Direct fit: Designed for 12-valve Cummins P7100 pumps (’94–’98), with install hardware for a clean, bolt-in upgrade.
- Track-ready: Intended for competition/off-road use where emissions compliance is not required.
Fitment
- 1994, 1995, 1996, 1997, 1998 Dodge Ram 2500 5.9L 12V Cummins (P7100)
- 1994, 1995, 1996, 1997, 1998 Dodge Ram 3500 5.9L 12V Cummins (P7100)
What’s Included
- Industrial Injection #8 Fuel Cam Plate
- Install hardware
Recommended Supporting Parts
Maximize results and tune drivability with these popular add-ons:
- 4K Governor Spring Kit – raises usable RPM range for stronger top-end power.
- Boost Elbow – quick, inexpensive boost control for HX35-equipped trucks.
- AFC Spring & Fuel Control Tuning – sharpen low-boost fueling and spool.
- Pyrometer (EGT) Gauge – monitor temps when adding fuel.
- Upgraded Lift Pump – ensure consistent supply to the P7100.
Install Notes
- Disconnect batteries and remove AFC housing to access the stock plate.
- Record stock plate position; install #8 plate with included hardware.
- Center and tighten; reassemble and test EGT/boost under load.
Emissions Notice
Competition use only. Not legal for use on pollution-controlled vehicles on public roads. Buyer/user is responsible for compliance with local, state, and federal laws.
Specifications
| Brand | Industrial Injection |
| Part Number | 23G404 |
| Plate Profile | #8 (Performance) |
| Pump Compatibility | P7100 (’94–’98 12V Cummins) |
| Vehicle Fitment | 1994–1998 Dodge Ram 2500/3500 5.9L 12V Cummins |
| UPC | 840256907827 |
| Weight | ~1.0 lb |
| Included | Fuel cam plate #8, install hardware |
FAQs
Q: Do I need tuning?
A: Mechanical tuning (AFC, governor springs) is recommended to fully realize gains and control smoke output.
Q: Will this work with my stock turbo?
A: Yes, but monitor EGT. Pairing with a boost elbow and pyrometer is highly recommended.
Q: Is it street legal?
A: No—this is a competition/off-road part. Check local laws before purchase and installation.
Q: What horsepower can I expect?
A: Results vary by truck and supporting mods. Many 12-valve builds pair the #8 plate with 4K springs and AFC tuning for a noticeable seat-of-the-pants gain.
