INDUSTRIAL INJECTION 22B407 DODGE S467.7 TURBO KIT - 2010-2012 RAM 2500/3500 6.7L CUMMINS - 1.00 A/R WITH RACE COVER

Wake up your 6.7L Cummins with the INDUSTRIAL INJECTION 22B407 S467.7 Turbo Kit. Built around the proven 67.7mm compressor with a 1.00 A/R turbine housing and race cover, this kit delivers strong mid-range and top-end airflow for towing, street, or competition builds while maintaining reliable EGT control with proper supporting mods.

Fitment

• 2010-2012 Dodge Ram 2500/3500 6.7L Cummins (pickup)

What's Included

• S467.7 turbocharger with race cover (1.00 A/R)
• Application-specific install hardware (oil feed/return, clamps, lines and small parts as supplied by kit)
• Brackets and couplers as required by the kit
• Install instructions

Key Features

• 67.7mm compressor with race cover for improved surge margin and cool, dense air
• 1.00 A/R turbine sized for quick spool with strong upper-RPM flow on 6.7L
• Designed for reliability under higher boost with the right fuel and head retention
• Supports substantial horsepower increases vs. stock while keeping drivability

Recommended CPP Parts (Internal Links Only)

• ARP 247-4202 Head Stud Kit - 6.7L Cummins
• T4 Exhaust Manifold (if required by your configuration)
• High-flow Downpipe / Adapter
• Intercooler Boot & Clamp Kit
• Lift Pump (AirDog / FASS) to Support Fuel Supply
• EGT & Boost Gauges / Monitor

Helpful Notes

• Verify whether your kit requires a T4 manifold and a specific downpipe/adapter for your truck. See Recommended Parts above.
• For best results, pair with adequate fuel supply, clean charge-air plumbing, and proper calibration for your setup.
• Always check drive pressure, EGT, and boost to maintain reliability under load.

FAQ

Expect quicker mid-range and much stronger top-end pull with proper fuel and tuning. Spool is very streetable on 6.7L with the 1.00 A/R housing.

For sustained higher boost and towing power levels, yes-we strongly recommend ARP 247-4202 head studs for long-term reliability.

Many performance turbo kits require a T4 manifold and matching downpipe/adapter. Check the contents of your kit and use our Recommended Parts links to complete the install.

A quality lift pump, clean intercooler boots/clamps, free-flowing exhaust, and EGT/boost monitoring. Calibrate fueling to keep EGT and drive pressure in check.