Product Description
Unlock dependable fuel delivery and headroom for larger injectors/tuning with the Industrial Injection Dragon Fire 10mm CP3 (Part # 0986437304DF) for the 2003-2004 5.9L Cummins. This remanufactured pump increases displacement versus stock to support higher rail pressure and volume while maintaining OE driveability when properly matched with lift pump and tuning.
Fitment
- 2003-2004 Dodge Ram 2500 5.9L Cummins (High Pressure Fuel Pump - CP3)
- 2003-2004 Dodge Ram 3500 5.9L Cummins (High Pressure Fuel Pump - CP3)
- Direct replacement for CP3 on 5.9L common-rail Cummins (2003-2004 only)
Why Choose the Dragon Fire 10mm?
- Higher displacement (10mm) vs. stock for increased rail volume
- Supports bigger injectors and elevated power goals with proper lift pump and tuning
- Remanufactured, bench-tested, and calibrated
- Retains stock-like manners for street use when paired with quality supporting mods
What's Included
- Industrial Injection Dragon Fire 10mm Remanufactured CP3 (P/N 0986437304DF)
- Pre-installed FCA/MPROP (where applicable) and sealing hardware as supplied by manufacturer
- Installation notes from manufacturer (when supplied)
Recommended Supporting Parts (Internal Links)
- Lift Pump (150-165 GPH for 5.9L Cummins)
- FCA/MPROP Fuel Control Actuator
- CP3 Install Seal Kit for 5.9L
- Matched Injector Set (2003-2004 5.9L)
- Rail Pressure Sensor (5.9L)
- Tuning Solution (03-04 Cummins)
Installation Notes
- Prime and verify supply pressure (lift pump recommended); low supply pressure can damage the CP3.
- Cleanliness is critical-cap all open fuel lines and components.
- Professional installation and calibration/tuning are strongly recommended.
Core & Warranty
- Core return must be an acceptable CP3 unit (like-for-like) and drained of fuel.
- Warranty subject to manufacturer inspection; contamination or improper installation may void coverage.
Emissions Notice
For off-road/competition use where applicable. Buyer is responsible for compliance with all local, state, and federal laws.
FAQ
Will this 10mm CP3 work with stock injectors?Yes. It can be used with stock injectors; however, benefits are maximized with proper lift pump and tuning. Ensure commanded rail pressure targets in your tune are appropriate.
Do I need a lift pump with this CP3?
Strongly recommended. A quality lift pump helps maintain consistent supply pressure and protects the CP3 from cavitation. See our 5.9L lift pump options.
Is tuning required after installation?
Not strictly required for basic operation, but performance gains and drivability are improved with appropriate tuning for your setup.
What core units are accepted?
Like-for-like CP3 cores for 2003-2004 5.9L Cummins in rebuildable condition. Excessive damage or non-matching cores may reduce or forfeit the refund.
Does this include the FCA/MPROP?
Most units ship with a calibrated FCA/MPROP. If you need a replacement, see FCA options.
Specifications for INDUSTRIAL INJECTION 0986437304DF DRAGON FIRE 10MM CP3 INJECTION PUMP - 2003-2004 DODGE RAM 2500/3500 5.9L CUMMINS
| Brand | Industrial Injection |
| Part Number | 0986437304DF |
| GTIN | 840256906288 |
| UPC | 840256906288 |
| Engine Compatibility | 2003–2004 Dodge Ram 2500/3500 5.9L Cummins (Common Rail) |
| Configuration | Dragon Fire 10mm CP3; performance injection pump; 10mm stroke pump for high-output fueling; 100% bench-tested and calibrated |
| Country of Origin | Assembled in the USA |
| Core Charge | $500.00 refundable core (added to product price) |
| Shipping Method | Standard Ground (UPS/FedEx) |
| Shipping Weight | ~30 lb (≈13.6 kg) |
| Package Dimensions | Approx. 14" × 10" × 8" |
| Prop 65 Warning | This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov. |
