Product Description
Upgrade your 2007.5–2010 Ram 3500/4500/5500 6.7L Cummins Cab & Chassis with the Industrial Injection 0986435519SE-R5 Reman Injector. This “R5” unit is extrude-honed and flow-matched to about 68 LPM for roughly 350 HP capability while maintaining smooth idle and reliable cold starts. Built, calibrated, and tested on Bosch equipment, it’s a direct-fit replacement for Cab & Chassis applications (not pickups).
Fitment
- 2007.5–2010 Ram 3500/4500/5500 Cab & Chassis with 6.7L Cummins (ISB)
- Direct replacement for Cab & Chassis emissions/calibration (different than pickup injectors)
What’s Included
- (1) Remanufactured injector (R5/350HP) with seals/washers pre-installed
Specifications
| Brand / Part # | Industrial Injection 0986435519SE-R5 |
|---|---|
| UPC | II2163000209 |
| Application | 2007.5–2010 Ram 3500/4500/5500 6.7L Cummins Cab & Chassis |
| Rated Output | Approx. 350 HP (R5) |
| Flow | ~68 LPM (EDM / extrude-honed, matched set calibration) |
| Injector Type | Common Rail, solenoid style (Bosch-based) |
| Warranty | 1 year / unlimited mileage (manufacturer) |
| Core Charge | Typical $100 refundable (subject to manufacturer terms) |
| Sold | Each |
| Emissions | Not CARB legal; for off-road/49-state use where applicable |
Recommended Parts (CPP Diesel)
- Injector Connector/Feed Tubes (03–18 Cummins) — always replace tubes to prevent return leaks and warranty issues.
- 6.7L Cummins Injectors & Install Kits — seals, hardware, and service tools.
- Severe-Duty Fuel Filtration Kit (07.5–12) — protect new injectors with clean fuel.
- Cummins Fuel Injectors Category — browse related OEM and performance options.
Helpful Notes
- Cab & Chassis injectors differ from pickup injectors; verify by VIN/ESN before ordering.
- Use fresh, high-quality filtration and clean procedures during install; contamination voids warranty.
- Return your core promptly in undamaged OEM condition to receive the refundable core credit.
FAQ
Is this the correct injector for Cab & Chassis (C&C) trucks?Yes. 0986435519SE-R5 is built for Cab & Chassis 6.7L Cummins (Ram 3500/4500/5500) and is different from pickup injectors. Always verify with VIN/engine serial number.
Do I need tuning for this R5/350HP injector?No tuning is strictly required for replacement on C&C calibrations, but airflow/fuel system health must support the added flow. Many customers pair injectors with proper filtration and healthy CP3 supply.
Should I replace injector connector/feed tubes?Yes. Replacing tubes is strongly recommended to prevent leaks and maintain warranty. See our connector tube set.
What is the warranty?Industrial Injection typically provides a 1-year, unlimited-mileage warranty on reman injectors (conditions apply; contamination or improper install isn’t covered).
Is there a core charge?Yes. Industrial Injection commonly requires a refundable core deposit (often around $100) for reman injectors. Core must be OEM and rebuildable.
