INDUSTRIAL INJECTION
INDUSTRIAL INJECTION 0986435519SE-R3 DODGE REMANUFACTURED INJECTOR FOR 2007.5-2010 6.7L CUMMINS STOCK CAB AND CHASSIS 180HP
- SKU:
- IIS0986435519SE-R3
- MPN:
- 0986435519SE-R3
- Shipping:
- Calculated at Checkout
Description
The Industrial Injection 180 HP / 78 Percent Over Race 3 Injectors have been extrude honed and balanced to a perfect matching set injectors that flow 45 LPM.
The Race 3 180 HP / 78 Percent Over injectors can be run with a stock turbo but one of our Phatshaft turbos or our compound turbo setups is highly recommended to help reduce EGTs.
We balance the injectors to a tighter tolerance than the original manufacturer and have put a lot of time into making these the best injectors money can buy. All the injectors we build in house are built with Brand New Factory OEM parts including the nozzles.
Features:
- 180 HP gain / 45 LPM / 78 Percent Over
- 1 year Unlimited Mileage Warranty
These injectors come with a new copper crush washer and o-rings for installation. Injectors are an OEM Genuine part that is a direct replacement injector. Each injector is Individually tested on a state of the art Factory OEM test stand to ensure that they meet OEM specifications.
Each test includes a resistance test, system leak test, purge, idle speed test, mid load test, full load test, and static back leak test. Each test cycle checks solenoid response time, back leak flow, and fuel delivery.
When replacing the injectors in your 6.7L Common Rail we highly recommend replacing the injector connecting tubes to avoid new injector contamination. The most common failure of new injector installations is contamination and the problem that we see most on these comes from the injector connecting tubes.
Each injector has a 150 core charge and is fully refundable if they are shipped back within 45 days.
All Industrial Injection products are covered by a one year/unlimited mile warranty.
Note: Please call to verify with Engine Serial Number for correct application!
The INDUSTRIAL INJECTION 0986435519SE-R3 represents the pinnacle of performance enhancements for your 2007.5-2010 6.7L Cummins Stock Cab and Chassis. Designed to deliver an impressive 180 HP gain and 78 percent increase in fuel flow, these remanufactured injectors boast an optimized performance that flows at 45 liters per minute (LPM). Each set of Race 3 injectors undergoes meticulous extrude honing and balancing, ensuring that they are calibrated to tighter tolerances than their original counterparts, guaranteeing superior functionality and reliability.
Constructed entirely from brand new factory OEM parts, including precision-engineered nozzles, these injectors are built to last. The installation process is simplified with the inclusion of new copper crush washers and o-rings, ensuring a hassle-free setup. Each injector is individually tested on state-of-the-art factory OEM test stands, allowing for rigorous quality checks that cover resistance, leakage, and load performance, ensuring full compliance with OEM specifications.
While these injectors are compatible with a stock turbo, pairing them with one of Industrial Injection's Phatshaft or compound turbo setups is recommended to minimize exhaust gas temperatures (EGTs) and maximize performance efficiency. To prolong the life of your new injectors, it's advisable to replace the injector connecting tubes during installation, as contamination is a common cause of new injector failures.
Each order comes with a 1-year unlimited mileage warranty, underscoring the commitment to quality and customer satisfaction. A refundable core charge of $150 applies, incentivizing the return of old injectors within 45 days. For optimal performance, verify your engine's serial number to ensure compatibility. Elevate your Cummins experience with the INDUSTRIAL INJECTION remanufactured injectors, where performance meets precision.