Product Description
Step up LMM fueling with precision 30 LPM nozzles. The INDUSTRIAL INJECTION 0433171985-R5 is an extrude-honed Bosch-style injector nozzle engineered for clean, consistent flow on the 2007.5–2010 GM 6.6L Duramax LMM platform. Ideal for competition builds that require additional fuel with proper air, lift pump, and tuning support.
Fitment
- 2007.5–2010 GM 6.6L Duramax LMM (Silverado/Sierra 2500HD/3500HD)
What’s Included
- (1) Extrude-honed injector nozzle — 30 LPM
Note: Sold individually. Order quantity 8 for a complete engine set.
Why It Works
- OE-style nozzle honed for higher, repeatable flow
- Supports elevated fuel demand with proper turbo, CP3, and lift pump
- Built for consistent spray pattern and drivability when correctly calibrated
Recommended Parts (CPP internal links)
- S&S Diesel CP3-DMX LBZ/LMM High-Pressure Pump (2001–2010)
- AirDog II-5G DF-220 Lift Pump (2001–2010 Duramax)
- Exergy 2400-bar Race Rail Pressure Relief Valve (LLY/LBZ/LMM)
- Need a different flow? See other LMM nozzle sizes:
- Shop All Duramax Injectors / Nozzles
Helpful Notes
- Tuning required. Increased nozzle flow must be paired with proper calibration.
- We strongly recommend a quality lift pump and verified rail pressure control for reliability.
- Professional installation and injector balancing are recommended for best results.
Emissions / Use
Competition/closed-course use only. Not legal for use on any pollution-controlled vehicle on public highways.
FAQ
Is this a full set or a single nozzle?This listing is for one (1) nozzle. Order 8 for a complete engine set.
Do I need custom tuning with 30 LPM nozzles?Yes. Proper ECU calibration is required to manage pulse width, pilot/rail strategy, and smoke control.
What supporting mods are recommended?At minimum: a healthy CP3 pump, a quality lift pump, and a rail PRV matched to your commanded pressure. See the Recommended Parts above.
Do you offer other flow sizes?Yes—R2 (22 LPM), R3 (24 LPM), and R4 (26 LPM) variants are available on our site for 2007.5–2010 LMM.