HAMILTON CAMS 07-C-220/240 STEEL 220/240 CAMSHAFT FOR 89-18 CUMMINS 5.9L/6.7L

The HAMILTON CAMS 07-C-220/240 220/240 STEEL CAM FOR 89-2018 Cummins 5.9L and 6.7L engines is a high-performance camshaft designed for engines operating in the 3,500-5200rpm range, particularly those equipped with excellent flowing heads. This camshaft boasts specifications that deliver optimal performance, including a lift duration of 220-240-110LSA, and precise timing for both intake and exhaust valves.

Information:

• RPM Range: 3,500-5200rpm
• Increased TOP END power
• Great for sled pulling applications especially the 3.0 class

Modification Required:

• Fly Cut Pistons
• Must be used with Billet steel dlc coated tappets

Applications:

• Drag strip
• Sled pulling

Break in:

To make sure that you have no issues during break-in, follow these few suggestions.

• Make sure that the cam has a Liberal amount of quality assembly lube applied
• DO NOT let the engine start without oil pressure
• When this is a new engine, be sure to put a liberal amount of assembly lube in the oil pump and prime the oil filter
• Be sure to change the oil after you have done your break-in procedure. When the filter and oil system are already primed, engine will get oil pressure much faster than if the oil is changed at the same time.
• Disconnect the fuel system and spin the engine with the starter until oil pressure can be read or until oil is coming out of the rocker arms.
• Once oil pressure has been verified, let the engine start and run until up to operating temp
• Adjust valves then you are cleared to abuse your engine. Enjoy the added airflow
• if you need to re-torque or “hot-torque “the head, do so before adjusting valves. When you retorque the head, the valve lash setting, so it is important to set lash last.

The HAMILTON CAMS 07-C-220/240 220/240 STEEL CAM (89+ CUMMINS) is a high-performance camshaft designed for engines operating in the 3,500-5200rpm range, particularly those equipped with excellent flowing heads. This camshaft boasts specifications that deliver optimal performance, including a lift duration of 220-240-109, and precise timing for both intake and exhaust valves.

To maximize the potential of the HAMILTON CAMS 07-C-220/240, aftermarket springs, pushrods, cam bushings, and .200" valve reliefs are required. The camshaft features specific dimensions to enhance engine performance, with detailed measurements for both intake and exhaust valves.

Please note that this product comes with a warning for Cancer and Reproductive Harm, which you can find at www.P65Warnings.ca.gov. Due to the ongoing COVID-19 pandemic, some parts may not be readily available in stock and may require drop shipping from the manufacturer. For quick orders or to verify availability, please contact us via phone or email. Additionally, manufacturers can alter prices without prior notice, and while we strive to keep our site updated, we appreciate your understanding and patience during this time.

Enhance your engine's performance and power with the precision-engineered HAMILTON CAMS 07-C-220/240 220/240 STEEL CAM. Upgrade your vehicle with this high-quality camshaft for an exhilarating driving experience. Thank you for choosing us for your automotive needs.