FLEECE FPE-PF-CUMM-2024-50 POWERFLO IN-TANK LIFT PUMP FOR 20-24 RAM WITH 50 GALLON TANK

The PowerFlo lift pump is the latest OEM replacement performance lift pump from the diesel experts at Fleece Performance. The PowerFlo is the only in-tank lift pump capable of supporting up to 800 hp!

Features:

• Direct OEM In-Tank Replacement: The PowerFlo Lift Pump retains the factory water-in-fuel sensor, factory fuel heater, factory fuel lines, and installs in less than half the time of other high flow lift pumps. 
• OEM Quality - Dual Gerotor: Two is always better than one, and the PowerFlo delivers with two OEM quality gerotor pumps, increasing flow capacity and increased reliability over the factory pump. Capable of supporting up to 800 hp, including dual CP3 pump configurations. 
• Seamless Integration: The active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the 1/4 tank issues typically encountered when seeking a higher flow lift pump to meet your engine's need. 
• Aftermarket Capable: Want the benefits of the in-tank pump but need to run your own fuel lines or aftermarket filters?  The pump outlet and return is threaded to accept a -8 O-ring fitting (3/4 inch-16 thread). 

Cross-Reference:

• Year: 2020-2024
• FPE Part Number: FPE-PF-CUMM-2024-50
• Replaces Dodge/Ram OE Part Number: 68490266AA used in 50 gallon tank 68534612AB

Application Notes:

• Operating Pressure: 18-20 psi at idle
• This pump is specifically intended for use with the factory installed 50-gallon fuel tank option. 
• Not for use with cab & chassis applications

The Fleece FPE-PF-CUMM-2024-50 PowerFlo In-Tank Lift Pump is engineered for peak performance and reliability in 2020-2024 Ram trucks with a 50-gallon fuel tank. Designed by the diesel experts at Fleece Performance, this lift pump represents a crucial upgrade in your fuel system, handling an impressive capacity of up to 800 horsepower.

As a direct OEM replacement, the PowerFlo lift pump integrates seamlessly with your vehicle's existing components. It retains the factory water-in-fuel sensor, fuel heater, and fuel lines, offering a hassle-free installation that can be completed in less than half the time of traditional high-flow pumps. This means less downtime and more time on the road.

Key to the PowerFlo's exceptional performance are its dual OEM-quality gerotor pumps. This innovative design increases flow capacity and enhances reliability, ensuring that your engine receives a consistent and adequate fuel supply, even in demanding conditions. With the pump's active fill bucket feature, the need for cumbersome tank sumps or additional air filtration is eliminated, addressing common issues like draw straw limitations and 1/4 tank failures.

Customizability is another strong point of the PowerFlo, as it is compatible with aftermarket fuel lines and filters. Its threaded outlet and return allow for easy adaptation to a -8 O-ring fitting, enabling you to tailor your fuel delivery system to your specific needs.

Designed specifically for the 50-gallon fuel tank option, the Fleece PowerFlo lift pump operates efficiently at an idle pressure of 18-20 psi and is not intended for cab & chassis applications. Upgrade your diesel performance with the reliability and efficiency of the Fleece PowerFlo lift pump, and experience the power that comes with optimized fuel management.