Product Description
FLEECE FPE-34610-PC 5.9L DUAL PUMP BRACKET AND MOUNTING HARDWARE
Build a rock-solid dual CP3 foundation on your 5.9L Cummins with the FLEECE FPE-34610-PC 5.9L Dual Pump Bracket and Mounting Hardware. This bracket kit is engineered specifically for common-rail 5.9L trucks, giving your dual pump setup the rigid support and precise alignment it needs for reliable, high-pressure fuel delivery on the street, track, or pulling line.
CNC-formed and designed around real-world high horsepower builds, this Fleece dual pump bracket locates your second CP3 in the correct geometry relative to the factory pump, helping maintain belt alignment, reduce harmonics, and keep your fuel system happy under heavy load. Whether you’re towing, daily driving, or chasing big power with compounds, this mounting kit lets you bolt on dual pumps with confidence.
- Engineered specifically for 5.9L common-rail Cummins applications
- Provides a rigid, properly aligned mounting location for a second CP3
- Includes bracket and mounting hardware for a clean, professional install
- Ideal foundation for high-horsepower dual CP3 fuel systems
- Compatible with popular Fleece dual pump controllers, harnesses, and pulleys
Fitment
- Engine: 5.9L Cummins common-rail diesel
- Truck: 2003–2007 Dodge / Ram 2500 & 3500 (5.9L Cummins)
- Configuration: Dual CP3 pump applications using Fleece-style dual pump hardware
This bracket and hardware kit is designed for 2003–2007 Ram 2500/3500 trucks equipped with the 5.9L common-rail Cummins. It provides the mounting solution for dual CP3 configurations where an additional pump is added to support higher rail pressure and increased fuel volume.
What’s Included
- Fleece 5.9L dual pump mounting bracket
- Mounting hardware (bolts, spacers, and related fasteners as supplied by Fleece)
Note: CP3 pumps, controllers, harnesses, pulleys, lines, and fittings are sold separately.
Recommended Fleece Cross-Reference / Companion Parts
Pair this dual pump bracket with these Fleece components (all available at CPP Diesel) for a complete, high-performance dual CP3 system:
- FLEECE FPE-CDPC CUMMINS DUAL PUMP CONTROLLER – ECM-friendly control for dual CP3 setups.
- FLEECE FPE-CP3X2 2003-2016 CUMMINS CP3X2 HARNESS – Harness solution to integrate dual CP3 pumps on 5.9L/6.7L Cummins.
- FLEECE FPE-34211-BLK-SPK SPOKE DESIGN CUMMINS DUAL PUMP PULLEY – Lightweight, spoke design dual pump pulley for use with FPE dual pump brackets.
- FLEECE FPE-34022-PC 6.7L DUAL PUMP BRACKET AND MOUNTING HARDWARE – Similar dual pump bracket solution for 2007.5+ 6.7L Cummins applications.
- FLEECE FPE-34196 6.7L CUMMINS DUAL PUMP KIT JUNCTION BLOCK – Great companion part if you’re also building a 6.7L dual pump system.
- FLEECE FPE-CP3-FEED 1/2 INCH CP3 FEED FITTING – Feed fitting to support higher fuel flow into your CP3 pumps.
- FLEECE FPE-CP3-RTRN 3/8 INCH CP3 RETURN FITTING – Return fitting for clean, leak-free fuel return routing.
Why Buy Your Fleece Dual Pump Hardware from CPP Diesel?
- Authorized Fleece Performance Engineering dealer
- Deep Cummins platform experience for 5.9L and 6.7L builds
- Fast shipping and diesel-focused customer support
- Huge selection of Fleece fuel system components in one place
FAQ
Does this kit include the CP3 pumps or dual pump controller?
No. The FLEECE FPE-34610-PC kit includes the dual pump bracket and mounting hardware only. CP3 pumps, the FPE-CDPC Cummins Dual Pump Controller, the FPE-CP3X2 harness, pulleys, and fuel lines are all sold separately so you can build your system to match your power goals.
What vehicles does the FPE-34610-PC bracket fit?
This bracket is designed specifically for 2003–2007 Dodge / Ram 2500 and 3500 trucks equipped with the 5.9L common-rail Cummins. It is not intended for 6.7L Cummins or earlier 24-valve VP44 engines.
Do I need custom tuning when adding a second CP3 with this bracket?
Many dual CP3 setups benefit from updated tuning and proper fuel system calibration, especially on higher horsepower builds. Always follow Fleece Performance and your tuner’s recommendations for your specific combination of injectors, turbochargers, and pumps.
Can I use this bracket with a stock CP3 plus an upgraded second pump?
Yes. This bracket is commonly used with the factory CP3 as the primary pump and a higher-output CP3 or CP3K as the secondary. Be sure to select a compatible pulley, belt routing, harness, and controller to support your final configuration.
Is any cutting or major modification required to install this bracket?
The FPE-34610-PC bracket is engineered to integrate with the 5.9L Cummins accessory layout and mount locations. Installation difficulty will vary with your specific turbo, piping, and accessory configuration, but for most common performance builds, only standard hand tools and careful routing of components are required.
Specifications for FLEECE FPE-34610-PC
| Specification | Value |
|---|---|
| Brand | Fleece Performance Engineering |
| Part Number | FPE-34610-PC |
| UPC | 670875716353 |
| GTIN | 670875716353 |
| Engine Compatibility | 5.9L Cummins common-rail (2003–2007 Ram 2500/3500) |
| Product Type | Dual CP3 pump mounting bracket and hardware |
| Shipping Weight | Approx. 6 lb |
| Package Dimensions (W x H x D) | 16.00 in x 1.00 in x 11.00 in |
| Shipping Method | Small parcel – shipping calculated at checkout |
| Cross Reference / Companion Fleece Parts | FPE-CDPC; FPE-CP3X2; FPE-34211-BLK-SPK; FPE-34022-PC; FPE-34196; FPE-CP3-FEED; FPE-CP3-RTRN |
| E-Codes | Not applicable (hardware component) |
| Prop 65 | Not applicable / No listed Prop 65 warning |
