Product Description

EDGE PRODUCTS 98618 EAS DATA LOGGING KIT COMPATIBLE W/ CS2/CTS2/CTS3

The EDGE PRODUCTS 98618 EAS DATA LOGGING KIT is built for serious data junkies and competition diesel owners who need more information than the factory sensors can provide. When paired with an Edge CS2, CTS2, or CTS3 monitor, this kit lets you watch, record, and replay critical powertrain parameters so you can fine-tune turbo, fueling, and chassis setups for dyno days, sled pulls, drag racing, or heavy towing. edge products 98618, eas data logging kit, edge data logging cs2 cts2 cts3, edge 98618 diesel tuner accessory, edge products logging kit 2x egts 2x 0-100 psi 2x temp sensors, cpp diesel edge products, performance data logging kit, insight cts3 eas sensors, competition diesel data logger, advanced diesel monitoring kit

Instead of guessing what your truck is doing, the 98618 kit brings eight separate sensor channels into your Edge monitor – including dual EGT probes, dual 0–100 PSIg pressure sensors, dual -40°F to 300°F temperature sensors, plus universal 5-volt inputs – for truly unmatched monitoring and datalogging capability. You can log passes, export the data, and make precise adjustments for safer EGTs, better boost control, and more power.  eas logging kit ultimate diesel enthusiast, monitor egt boost and temp, data logs for dyno sled pull drag race, edge products eas starter kit with sensors, advanced diesel diagnostics, cppdiesel edge products 98618

WHAT’S INCLUDED – EDGE 98618 EAS DATA LOGGING KIT

• EAS Starter Kit / harness for CS2, CTS2, and CTS3 monitors 
• (2) EAS EGT probes with leads for dual exhaust gas temperature monitoring
• (2) EAS 0–100 PSIg pressure sensors – ideal for boost, drive pressure, or fuel pressure
• (2) EAS -40°F to 300°F temperature sensors for trans, coolant, or other fluids
• (2) EAS universal 5-volt sensor inputs for additional custom sensors 

With these sensors and inputs, the 98618 kit gives you enough data channels to completely map what your truck is doing under load – and then refine your combo for maximum performance and durability.

FITMENT & COMPATIBILITY

The EDGE PRODUCTS 98618 is an EAS (Expandable Accessory System) data logging kit. It is not vehicle-specific; instead, it expands the capabilities of compatible Edge monitors.

Monitor compatibility:

• Edge Insight CS2
• Edge Insight CTS2
• Edge Insight CTS3 (PN 84130-3) 

Typical vehicle applications:

• 1996+ OBD-II diesel trucks running an Edge CS2/CTS2/CTS3 monitor
• Highly modified street, tow, dyno, sled pull, and drag race builds
• Trucks with upgraded turbos, injectors, fueling systems, or transmissions where factory sensors are no longer enough

If your truck already has an Edge Insight CS2, CTS2, or CTS3 monitor installed and you want the ability to log EGT, boost, drive pressure, fuel pressure, and temperature from multiple locations, the 98618 EAS Data Logging Kit is the correct add-on.

HOW THE EDGE 98618 EAS DATA LOGGING KIT HELPS

• Dual EGT monitoring – watch pre- and post-turbo exhaust temperatures, or monitor two different banks/cylinders.
• Boost, drive, or fuel pressure – two 0–100 PSIg channels let you see boost and drive pressure together, or fuel pressure versus boost. 
• Critical fluid temps – monitor transmission, engine oil, intercooler, or auxiliary fluid temps.
• Full datalogging – log complete runs, review the graphs on your computer, and dial in wastegate, tuning, or chassis changes.
• Safety and performance – avoid melted pistons, overheated transmissions, and lean fueling by watching real data instead of guessing.

CROSS-REFERENCE EDGE PRODUCTS ON CPP DIESEL

Build a complete Edge monitoring and EAS stack using these related EDGE PRODUCTS available from CPP Diesel:

• EDGE PRODUCTS 84130-3 INSIGHT CTS3 UNIVERSAL OBD-II MONITORING – the 5" digital gauge display that your 98618 EAS Data Logging Kit plugs into.
• EDGE PRODUCTS 98602 EAS STARTER KIT COMPATIBLE W/ CS2/CTS2/CTS3 – the base harness for expanding your EAS network if you are starting from scratch.
• EDGE PRODUCTS 98616 EAS CONTROL KIT COMPATIBLE W/ CS2/CTS2/CTS3 – adds an EGT sensor and power switch control through your Edge monitor.
• EDGE PRODUCTS 98623 EAS STREET DIESEL KIT COMPATIBLE W/ CTS3 AND CS2/CTS2 – a pre-configured EAS package tailored for street-driven diesel trucks.
• EDGE PRODUCTS 98609 EAS POWER SWITCH W/ STARTER KIT COMPATIBLE W/ CS2/CTS2/CTS3 – control auxiliary loads like lights, pumps, and fans from your screen.
• EDGE PRODUCTS 98611 EAS EGT W/OUT START KIT COMPATIBLE W/ CS2/CTS2/CTS3 – a standalone EAS EGT expansion ideal for tow rigs and work trucks.

WHY BUY EDGE PRODUCTS 98618 FROM CPP DIESEL?

• Genuine EDGE PRODUCTS inventory – no generic sensors or mismatched harnesses.
• Diesel-focused support – we understand tuning, data, and what numbers actually matter for your combo.
• Free shipping on qualifying orders and fast order processing from our diesel specialists. 
• Perfect match to Edge Insight monitors – plug-and-play integration designed by Edge.

FREQUENTLY ASKED QUESTIONS

Does the EDGE PRODUCTS 98618 kit include everything I need to start datalogging?

Yes. The 98618 kit includes the EAS starter harness plus dual EGT probes, dual 0–100 PSIg pressure sensors, dual temperature sensors, and universal 5-volt inputs. You only need a compatible Edge CS2, CTS2, or CTS3 monitor already installed on your vehicle. 

Will the EDGE 98618 EAS DATA LOGGING KIT work on any diesel truck?

The sensors themselves are universal, so the kit will work on virtually any 1996+ OBD-II diesel truck as long as it is paired with a compatible Edge CS2, CTS2, or CTS3 monitor. There are no vehicle-specific fittings included, so you’ll need to install the probes and sensors in appropriate locations on your particular setup.

Can I log boost, drive pressure, and fuel pressure at the same time?

Yes. The kit includes two 0–100 PSIg pressure sensors plus universal 5-volt channels, so you can configure one sensor for boost, another for drive or fuel pressure, and still use the remaining channels for additional custom pressure or voltage inputs.

Is the 98618 kit only for race trucks, or is it useful for towing?

It’s valuable for both. Competition trucks benefit from detailed logs to fine-tune power, but tow rigs use the same data to keep EGTs, transmission temperature, and boost under control when pulling heavy loads in hot conditions.

Do I need any additional EAS components to add this kit to my Insight CTS3?

The 98618 kit includes its own EAS starter harness, so most trucks won’t need extra EAS pieces. If you’re building a larger EAS network with many sensors and power switches, you may want to combine this kit with products like the 98602 EAS Starter Kit or 98616 EAS Control Kit for even more expandability.

SPECIFICATIONS