EDGE PRODUCTS 98106 OBDII SPLITTER CABLE

The EDGE PRODUCTS 98106 OBDII SPLITTER CABLE is designed for diesel owners who need to run their Edge CTS3/CTS2 monitor while keeping an additional OBD-II port available for service tools, GPS/telematics devices, emissions testing equipment, fleet trackers, or dealership diagnostics. This heavy-duty Y-style harness provides two fully functional OBD-II outputs from your factory port. edge products 98106 obdii splitter cable, edge obd2 y harness, cts3 obd splitter, diesel tuner obd extension, obd port splitter cable cpp diesel, edge monitor harness kit

Unlike cheap generic splitters, the Edge 98106 uses OEM-quality, shielded wiring and molded connectors to maintain signal integrity for tuning, monitoring, scanning, and bi-directional diagnostics. If you rely on your CTS3 monitor daily but still need access for shop tools or plug-in accessories, this splitter is the safest and cleanest way to expand your OBD-II capabilities without repeatedly plugging and unplugging devices. high quality obd splitter edge products, obd expansion cable truck diesel, dual diagnostic port harness, edge cts3 accessories

FEATURES & BENEFITS

• Provides two working OBD-II ports from your vehicle’s factory connector.
• Allows simultaneous use of an Edge CTS3/CTS2/Insight monitor and another OBD-II device.
• Prevents repeated plugging/unplugging that can wear out the factory port.
• OEM-grade connectors and shielded wiring for reliable signal quality.
• Flexible, durable cable routing for clean under-dash installation.
• Ideal for shops, fleets, hotshot towing, and diesel tuning setups.

FITMENT & COMPATIBILITY

The EDGE PRODUCTS 98106 OBDII SPLITTER CABLE is compatible with:

• Edge Insight CTS3
• Edge Insight CTS2
• Edge Evolution / Juice w/ Attitude CTS2 & CTS3 platforms
• Most OBD2-enabled cars, trucks, and SUVs (gas & diesel)

Works with any vehicle using a standard OBD-II diagnostic connector (1996+ light-duty vehicles).

COMMON USES

• Using a CTS3 monitor while retaining access for dealer scan tools
• Running telematics/GPS devices alongside Edge monitoring
• Fleet/Hotshot operations needing simultaneous data feeds
• Emissions testing or inspections requiring open OBD access
• Dedicated track/tow builds that use supplemental data devices

CROSS-REFERENCE EDGE PRODUCTS AT CPP DIESEL

Enhance your Edge monitoring experience with these compatible products:

• EDGE PRODUCTS 84130-3 INSIGHT CTS3 UNIVERSAL OBD-II MONITORING
• EDGE PRODUCTS 98203 CAMERA KIT CTS3, T2, DASHPaq+ CTS3 BACKUP CAMERA
• EDGE PRODUCTS 98602 EAS STARTER KIT COMPATIBLE W/ CS2/CTS2/CTS3
• EDGE PRODUCTS 98605 EAS UNIVERSAL SENSOR INPUT 5 VOLT
• EDGE PRODUCTS 98607 EAS PRESSURE SENSOR 0–100 PSIG COMPATIBLE W/ CS2/CTS2/CTS3

FREQUENTLY ASKED QUESTIONS

No. The cable is designed to maintain correct OBD-II signal integrity so your CTS3 and other devices continue to work normally.

Yes. The splitter is built for continuous use and does not interrupt communication between your vehicle and connected OBD-II tools.

If the vehicle uses a standard OBD2-style connector, the splitter will function. Some medium/heavy-duty trucks with non-standard ports require adapters.

Yes. Any CTS3 device that uses the OBD-II connection for power and data will work with the 98106 splitter cable.

No. Simply plug the male end into the factory port and route the two female connectors to accessible locations under the dash.

SPECIFICATIONS