Product Description
Build clean, high-flow exhaust sections with the DIAMOND EYE 529005 3" 90° L-bend. This universal, mandrel-bent aluminized steel elbow is perfect for tight turns in custom downpipes, mid-pipes, stacks, and over-axle routing. One end is flared/slip-fit friendly for easier mock-up and assembly.
Fitment
- Universal exhaust fabrication: 3.0" (76.2 mm) tubing
- 90° L-bend, mandrel-bent for smooth flow
- Material: Aluminized steel
- Works on diesel or gas builds (weld or quality band clamps)
Cross-Reference / Related Diamond Eye Parts
- DIAMOND EYE 529006 — 3" 90° Elbow, Stainless
- DIAMOND EYE 529010 — 3.5" 90° Elbow, Aluminized
- DIAMOND EYE 529020 — 4" 90° Elbow, Aluminized
- DIAMOND EYE 529021 — 4" 90° Elbow, Stainless
- DIAMOND EYE 529025 — 5" 90° Elbow, Aluminized
- DIAMOND EYE 529026 — 5" 90° Elbow, Stainless
- DIAMOND EYE BC300A — 3" Torca Band Clamp, Aluminized
- DIAMOND EYE BC300S409 — 3" Torca Band Clamp, Stainless
Why CPP Diesel
- Curated Diamond Eye selection for Dodge Cummins, Ford Power Stroke & GM Duramax
- Real truck techs, fast shipping, and honest support
Specifications
Brand | Diamond Eye Performance |
MPN | 529005 |
Diameter | 3.0" (76.2 mm) |
Bend | 90° L-bend, mandrel |
Material | Aluminized Steel |
UPC | 841963118247 |
GTIN | 841963118247 (UPC-A) |
Shipping Weight | ~4.0 lb |
Ship Dimensions | ~13.0" L × 9.0" W × 9.0" H |
Prop 65 | ⚠️ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov |
FAQs
Will this fit my truck?
This is a universal 3" mandrel-bent elbow for custom fabrication. Verify your tubing OD (3.0") and available clearance before ordering.
Is one end flared or slip-fit?
Yes—these elbows are commonly offered with a flared end to simplify mock-up and assembly. Always dry-fit before final welding or clamping.
Aluminized vs. stainless—what should I pick?
Aluminized is budget-friendly with solid corrosion resistance; T409 stainless is best for harsh climates and long-term durability. See the 3" stainless version: 529006.
How should I install it?
Mock up the run, cut to length, deburr, then weld or use high-quality Torca band clamps (e.g., BC300A, BC300S409). Maintain clearance from wiring, lines, and heat-sensitive components.