Product Description
Dominate your 6.7L build. The CP CARRILLO PS67HD6969S Pro-H Connecting Rod Set uses premium CARR multiphase 7/16” bolts and oversized forgings for ultra-consistent grain flow, then finishes with precision CNC machining, magnaflux and Rockwell validation, and shot peen for fatigue life. Built for big boost, heavy tow, and competition duty on 2011–2015 Ford 6.7L Powerstroke.
Fitment
- Ford Powerstroke 6.7L (2011–2015), set of 8 connecting rods.
- Typical chassis: F-250, F-350, F-450, F-550 (verify build specifics with your engine builder).
Why CP Carrillo Rods
- Pro-H beam architecture for strength under extreme cylinder pressure.
- CARR multiphase 7/16” bolts for clamp load consistency.
- Heat-treated, VAR-grade alloy; dimensional probing on CNC; shot-peened finish.
Cross-Reference / Alternatives (CP Carrillo Only)
- 2016–2019 6.7L (H-11 bolts): CARRILLO PS6716HD6969H
- 6.0L Powerstroke (CARR bolts): CARRILLO PS606929S
- 6.4L Powerstroke (CARR bolts): CARRILLO PS646929S
- 7.3L Powerstroke (CARR bolts): CARRILLO PS737130S
What’s Included
- (8) CP Carrillo Pro-H connecting rods
- (8) CARR multiphase 7/16” rod bolts
Specifications for CP CARRILLO PS67HD6969S
| Attribute | Value |
|---|---|
| Brand | CP Carrillo |
| Part Number | PS67HD6969S |
| Engine | Ford Powerstroke 6.7L (2011–2015) |
| Center-to-Center Length | 6.969 in |
| Bolt | 7/16" CARR multiphase |
| Big-End Bore (approx.) | ~2.992 in |
| Big/Pin End Width | ~1.058 in each |
| Pin Size | ~1.339 in |
| Set Quantity | 8 rods |
| UPC | Not provided by manufacturer |
| GTIN | Not provided by manufacturer |
| Shipping Weight (est.) | ~15 lb |
| Package Dimensions | Approx. 12" × 12" × 5" |
| Shipping Method | Standard ground; calculated at checkout |
| Cross-Reference | PS67HD6969H (H-11 bolts, 2011–2015); PS6716HD6969S (CARR bolts, 2016–2019) |
| E-Codes | N/A (internal engine component) |
| Turbo Series | N/A (rods are not a turbocharger) |
| Prop 65 | May contain materials requiring California Proposition 65 warning. See P65Warnings.ca.gov. |
FAQ
Will these rods support high boost and heavy towing?
Yes. The Pro-H beam and CARR multiphase bolts are designed for extreme cylinder pressures and high cyclic loads found in towing and competition builds.
Do they fit all 2011–2015 6.7L Powerstroke variants?
They are engineered for 2011–2015 6.7L Powerstroke platforms. Always confirm clearances and bearing specs for your exact short-block configuration.
What’s the difference between PS67HD6969S and PS67HD6969H?
“S” uses CARR multiphase bolts; “H” uses H-11 tool-steel bolts. Both are Pro-H rods—choose based on your builder’s bolt preference and target power.
Are bearings included?
No. Rod bearings are sold separately.
