BHP BHP2001 ADJUSTABLE SLED HITCH 2.5 INCH

The BHP BHP2001 Adjustable Sled Hitch 2.5 inch is the ultimate solution for both passionate pulling truck drivers and casual weekend enthusiasts. Engineered for precision and durability, this adjustable hitch elevates performance by offering unparalleled versatility in height adjustments, making it a must-have for serious competitors.

Featuring an innovative adjustable pin-in-place ring, this sled hitch provides an impressive range of over 8 inches of rise or drop from the center of the receiver tube. With 12 distinct height positions, optimizing the hook point of your truck to adhere to regulations no longer requires guesswork; you can easily set it to the exact height required for peak performance.

Constructed from robust 2-inch cold-rolled solid steel for the shank and reinforced with a 2.5-inch hot-rolled steel bar for the upright, this hitch is built to withstand the demands of competitive sled pulling. The precision-drilled holes ensure a snug fit for the pins, minimizing slop that can lead to instability or unwanted noise during runs.

Designed to accommodate all sled pulling sled hooks, the hitch ring is crafted from a hefty 1.25-inch solid steel plate, featuring a 3.75 x 3-inch oblong hole for compatibility. Although the receiver pin hole is un-drilled, it allows for customization based on your truck's specifications, ensuring a tailored fit.

The striking black powder-coated finish not only enhances durability but also adds an aesthetically pleasing element to your truck setup. All necessary hardware is included for a straightforward installation, although a receiver pin is not provided.

Elevate your pulling experience with the BHP BHP2001 Adjustable Sled Hitch—because every detail matters when chasing victory on the track!

Adjustable pin provides different levels of height adjustment
- Offers over 8" of rise or drop from the center of receiver tube
- 12 different height positions to make sure the hook point on the truck is as high as allowed
- Made to fit nicely with our BHP line up of receivers
- All necessary hardware included

 

Whether you are running a dedicated pulling truck or just a weekend warrior, this is the only adjustable pulling hitch you want to use!

The 2.5 inch Big Hitch Products adjustable pulling hitch will give your truck the competitive edge against your competition.

Product Features
• The adjustable pin-in-place ring can be flipped over to provide different levels of height adjustment
• Offers over 8" of rise or drop from the center of the receiver tube
• 12 different height positions to make sure the hook point on the truck is as high as the rules will allow
• The shank that slides into the receiver tube is made from 2" cold rolled solid steel bar
• Upright is made out of 2 1/2" hot rolled steel bar with precision drilled holes to allow the pins to slide in and out easily without a lot of slop that can cause hopping issues or weird noises while going down the track
• Hitch ring is cut from 1 1/4" solid steel plate to regulation size with a 3.75" x 3" oblong hole to fit all sled pulling sled hooks
• Receiver pin hole does not come drilled so you can adjust it to your specific truck's application
• Made to fit nicely with our BHP line up of receivers!
• Black powdercoated finish

Installation
• Slide hitch into your truck's receiver, mark the spot for where the hole will be drilled for the receiver pin in your truck's application, drill 5/8" hole for pin, slide hitch back into receiver and pin to secure

All necessary hardware included.
Does NOT include receiver pin.