BDS SUSPENSION
BDS SUSPENSION BDS542H 4 INCH LIFT KIT FORD F250/F350 SUPER DUTY 08-10 4WD GAS BLOCK KIT WITHOUT FACTORY OVERLOAD NX2 NITRO
- SKU:
- BDS542H
- MPN:
- BDS542H
- Shipping:
- Calculated at Checkout
Description
Increase ground clearance on your 2008-2010 Ford F250 and F350 Super Duty gas truck with this 4-inch lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35 inch Tires.
Up front the lift kit includes gas-specific Pro-Ride coil springs, heavy-duty radius arm drop brackets, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned nitrogen charged shocks.
In the rear this kit utilizes a high-strength lift block, longer u-bolts and a matching set of NX2 Nitro or FOX Performance shocks.
Pro-Ride Coil Springs
A pair of full-length, gas-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.
Steering Correction
To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.
- Front Lift Method: Coil Spring
- Rear Lift Method: Block
- Shocks Included: Yes
- Front Lift Height: 4 inch
- Rear Lift Height: 5 inch
- If equipped with 2-piece driveshaft, a driveshaft alignment kit may be required
- Easy, 100 percent Bolt-on installation
- Pro-Ride dual rate coil springs provide a remarkable ride through any terrain
- Heavy duty radius arm drop brackets provide correct caster and will maintain your stock driving characteristics.
- Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
- Steel lift blocks with built-in bump stop provide level stance from front to rear
- Standard NX2 Nitro shocks with vehicle-specific valving for better control
- Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road
Rear Lift Option Block Kit without Factory Overload
- Determine if your truck was manufactured with or without top-mounted overload springs on the rear leaf springs.
- Blocks made of steel for high strength.
- Designed to provide correct pinion angles.
Tire Size: 35 x 12.5 Tire Size 2: 35 x 12.5 Wheel Diameter: 18 x 9 Wheel Diameter 2: 20 x 9 Back Spacing: 4.5/4.5
Shock Option NX2 Nitro Series
- Nitrogen-charged
- Twin-tube design
- 10-stage velocity-sensitive valving
- Dual-welded ends for increased strength
- 1-3/8-inch high-flow piston
- Self-lubricating seals
- Silver powder coat finish
Kit Components:
- Includes one BDS013412, 08 Ford F250/350 4 Inch Front Box Kit, UPC Code 658848613434
- Includes one BDS013519, 2005-up Ford F250/F350 5in Rear Block, UPC Code 658848613625
- Includes one BDS033412, 2005-2024 Ford F250/F350 Gas 4 inch Coil Spring Kit, UPC Code 658848616534
- Includes one BDS85415, Steering Stab 23.9 x 14.3 - EB1/EB1, UPC Code 711745609112
- Includes two BDS85700, Shock- 25.20 x 15.20 x 2-3/8 - S50/EB2, UPC Code 711745609495
- Includes two BDS85760, Shock- 33.00 x 19.25 x 2-3/8 - EB1/EB1, UPC Code 711745609693
Featuring gas-specific Pro-Ride coil springs, this kit provides just the right lift height along with a smooth, controlled ride across a variety of terrains. The heavy-duty radius arm drop brackets ensure accurate caster angles and maintain the stock driving characteristics of your truck. Steering precision is enhanced with the inclusion of a forged drop pitman arm and a heavy-duty track bar relocation bracket, keeping the front axle centered and steering responsive during suspension travel.
The rear setup incorporates a high-strength lift block and longer u-bolts, complemented by a matching set of standard NX2 Nitro shocks. For custom performance enthusiasts, an upgrade to FOX 2.0 Performance Series shocks is available, perfect for those who demand the best handling both on and off-road.
Installation is straightforward and completely bolt-on, designed with ease in mind. The kit not only includes vital components like brake line brackets and sway bar relocation but also provides a level stance from front to rear thanks to the steel lift blocks with built-in bump stops.
Before installation, confirm if your truck is equipped with top-mounted overload springs on the rear leaf springs for proper fitment. With durable construction and precise engineering, the BDS542H lift kit is a reliable choice for any Ford Super Duty owner seeking improved off-road prowess without compromising on everyday drivability.