BDS SUSPENSION BDS274FS 4 INCH LIFT KIT DODGE RAM 2500 POWER WAGON 05-07 4WD 4 INCH BLOCK 4 INCH AXLE FOX 2.0 PERFORMANCE SHOCKS

Improve the ride and style of your 2005-2007 Dodge RAM 2500 Power Wagon truck with this 4-inch lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 36 inch Tires.

BDS engineered new lower control arms are longer than stock to rotate the axle for proper alignment and built a relocation mounting bracket to flatten out the angle of the upper control arm to maintain your factory handling characteristics.

Up front the lift kit includes gas-specific Pro-Ride coil springs, all four control arms plus relocation bracket, forged drop pitman arm and track bar bracket for steering correction, bump stops, sway bar links, and precision tuned NX2 or FOX 2.0 nitrogen charged shocks. In the rear this kit utilizes heavy duty cast steel blocks, longer u-bolts, and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.

Pro-Ride Coil Springs

A pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

• Front Lift Method: Coil Spring
• Rear Lift Method: Leaf Spring
• Shocks Included: Yes
• Front Lift Height: 4 inch
• Rear Lift Height: 4 inch

1. These vehicle were manufactured with two different diameter rear axles. You will need to measure the diameter of your rear axle before ordering. It should be 3-1/2 inch or 4 inch in diameter.
2. May require exhaust modification to clear the front driveshaft at full droop.
3. If your Truck has had the steering gear box changed and the sector shaft diameter measures 1-1/2 inch-1-5/8 inch you will need to add part BDS082404 to your kit.

• Tubular short arms improve strength, handling and caster control
• Heavy duty control arm brackets maintain proper suspension geometry
• Front high strength progressive rate coil springs for a great ride on any terrain
• Front track bar relocation bracket to re-position axle
• Forged drop pitman arm to correct steering angles
• Front sway bar correction to maintain handling performance
• BDS NX2 gas or FOX performance series Internal Floating Piston gas shocks to improved ride and offroad performance

Rear Lift Option Block Kit

• Includes a rear block and u-bolt kit to achieve a 4 inch rear lift.
• Blocks are made from cast iron for strength.
• Tapered for correct pinion angle.
• Steel pin and hole are offset to restore axle position.

Axle Diameter 4 Inch

The Dodge Ram truck has 2 different rear axle diameters. Please measure your rear axle and select the appropriate rear kit for your vehicle.

FOX 2.0 Performance Series

• 2-inch Impact extruded aluminum body
• Internal floating piston (Internal Floating Piston) monotube design
• CNC machined 6061-T6 aluminum mounting ends
• Massive 5/8-inch hard chrome plated heat-treated alloy steel shaft
• Race-developed high-flow piston design
• Application-specific valving to maximize performance
• Long-lasting clear anodized finish

Kit Components:

• Includes one BDS012405, 03-up Dodge 3/4ton 4 Inch Rear, UPC Code 658848612352
• Includes one BDS012611, 03-07 Dodge 3/4-1 ton Box Kit, UPC Code 658848612734
• Includes one BDS032601, 03-12 Dodge Ram 2500(gas) 6 Inch Coil Kit, UPC Code 658848616411
• Includes one BDS122401, 05-13 Power Wagon Sway Bar Links, UPC Code 658848619467
• Includes two FOX98224751, Fox 2.0 Shock 29.85 x 18.25 x 2- S50/EB1
• Includes two FOX98224761, Fox 2.0 Shock 33.85 x 20.75 x 2- EB1/EB1

Transform your 2005-2007 Dodge RAM 2500 Power Wagon into a powerhouse of performance and style with the BDS Suspension BDS274FS 4-inch Lift Kit. This comprehensive lift solution enhances your truck's stance while providing clearance for impressive 36-inch tires to conquer any terrain with confidence.

Each component of this lift kit has been meticulously engineered for optimal performance and alignment. The included longer lower control arms ensure precise axle rotation, maintaining your factory handling characteristics. Integrated mounting brackets flatten the upper control arm angle, contributing to a smooth ride quality.

Elevate your truck's front end with the specially designed gas-specific Pro-Ride coil springs. Crafted from high tensile steel, these springs deliver a balance of lift height and ride quality that adapts seamlessly to various driving conditions. The lift kit includes all the necessary components for a complete installation, including control arms, bump stops, sway bar links, and a track bar bracket for steering correction.

At the rear, heavy-duty cast steel blocks and longer u-bolts work in unison with NX2 Nitro or FOX 2.0 Performance shocks to provide stability and control, ensuring a predictable ride over any surface. The shocks feature an internal floating piston design and application-specific valving to maximize performance and durability.

This lift kit is designed with versatility in mind, offering options to accommodate different rear axle diameters, ensuring compatibility and performance regardless of your specific setup. Whether you’re traversing rugged trails or cruising through city streets, the BDS274FS 4-inch Lift Kit combines style, strength, and superior handling for an exceptional driving experience. Elevate your Dodge RAM Power Wagon today and embrace the Off-Road adventure like never before.