BDS SUSPENSION BDS2307 RECOIL TRACTION BAR KIT FORD F150 21-24

Improve traction on your 2021-2024 Ford F150 4WD without limiting wheel travel with a BDS Recoil Traction Bar Mounting Kit, made with heavy wall construction and internal compression springs that can be loaded or unloaded while installed on the vehicle to control axle wrap.

Full float design for bind-free performance and can be installed with a range of lift heights.

Fabricated from 2-inch OD x 3/16-inch wall steel tubing with a threaded bung welded in toward the axle and a CNC-machined end at the frame. Axle mount uses BDS's ultra-durable large-forged flex end and jam nut.

Using a forged housing with large 1-1/4-nch x 12 threaded shank, a single sided snap ring and 1-piece flex ball, the flex ends are capable of up to 15 degrees of misalignment in either direction.

At the frame end the bar uses a durometer specific polyurethane bushing and free floats in the traction bar utilizing a pair of dual stage internal compression springs and UHMW polyurethane bearings.

• Fits 0-6 inch of rear lift
• Will NOT work with Standard Cab / Short Box
• Will work with Ford Raptor
• Adjustable axle wrap control using dual-stage resistance springs
• Full floating traction bar design will not bind throughout the full range of wheel travel and/or hinder suspension articulation
• Spring preload can be adjusted on the vehicle without disassembling the traction bar
• Traction bar ends are greaseable and rebuildable
• Mounting brackets are bolt-on, only requiring minor drilling for frame mount installation

Install Time:

• 3-4 hrs Moderately Easy

Kit Components

Includes one BDS123409, Recoil Traction Bar Box Kit, UPC Code 711745604230
Includes one BDS123427, 2021-2024 Ford F150 Recoil Mounting Kit, UPC Code 711745604322

Enhance your driving experience with the BDS Suspension BDS2307 Recoil Traction Bar Kit for the 2021-2024 Ford F150 4WD. Designed to elevate traction without restricting wheel travel, this innovative kit is perfect for off-road enthusiasts and everyday drivers alike. Crafted from robust 2-inch OD x 3/16-inch wall steel tubing, the kit features a combination of internal compression springs and advanced engineering designed to control axle wrap effectively.

The BDS Recoil Traction Bar Kit utilizes a full float design that ensures smooth, bind-free performance. With compatibility for rear lifts between 0-6 inches, it seamlessly integrates with a variety of lift heights, including compatibility with the Ford Raptor. The forged housing with a large 1-1/4-inch x 12 threaded shank allows for flexibility and robustness, while the traction bar ends incorporate greaseable and rebuildable features for lasting durability.

Adjustability is key with this kit; users can modify axle wrap resistance via dual-stage compression springs directly on the vehicle, eliminating the need for disassembly. The unique construction also allows for up to 15 degrees of misalignment in either direction, providing unparalleled adaptability during rigorous driving conditions.

Installation is straightforward, requiring only minor drilling for the frame mount, with an estimated install time of 3-4 hours, marking it as moderately easy. The BDS2307 Recoil Traction Bar Kit promises not only to enhance the performance of your Ford F150 but also ensure a stable and capable ride on varied terrains. Elevate your truck’s capabilities with this robust and expertly engineered traction bar kit, designed to meet the demands of both work and play.