BDS SUSPENSION BDS2303 RECOIL TRACTION BAR KIT CHEVY SILVERADO AND GMC SIERRA 1500 07-23

Improve traction on your 2007-2023 Chevy Silverado or GMC Sierra 1500 without limiting wheel travel with a BDS Recoil Traction Bar Mounting Kit, made with heavy wall construction and internal compression springs that can be loaded or unloaded while installed on the vehicle to control axle wrap. Full float design for bind-free performance and can be installed with a range of lift heights.

Fabricated from 2-inch OD x 3/16-inch wall steel tubing with a threaded bung welded in toward the axle and a CNC-machined end at the frame. Axle mount uses BDS's ultra-durable large-forged flex end and jam nut.

Using a forged housing with large 1-1/4-nch x 12 threaded shank, a single sided snap ring and 1-piece flex ball, the flex ends are capable of up to 15 degrees of misalignment in either direction. At the frame end the bar uses a durometer specific polyurethane bushing and free floats in the traction bar utilizing a pair of dual stage internal compression springs and UHMW polyurethane bearings.

1. Does not fit regular cab models
2. requires 2 inch rear bump stop extension
3. includes (1) 123049 traction bar kit & (1) 141409 mounting kit.

• Adjustable axle wrap control using dual-stage resistance springs
• Full floating traction bar design will not bind throughout the full range of wheel travel and/or hinder suspension articulation
• Spring preload can be adjusted on the vehicle without disassembling the traction bar
• Traction bar ends are greaseable and rebuildable
• Mounting brackets are bolt-on, only requiring minor drilling for frame mount installation

Install Time:

• 3-4 hrs
• Moderately
• Easy

Kit Components

Includes one BDS121409, 2007-2023 Chevy/GMC 1500 Recoil Mounting Kit, UPC Code 658848619047
Includes one BDS123409, Recoil Traction Bar Box Kit, UPC Code 711745604230

Enhance the performance of your 2007-2023 Chevy Silverado or GMC Sierra 1500 with the BDS Suspension BDS2303 Recoil Traction Bar Kit. Designed to significantly improve traction without compromising wheel travel, this kit incorporates heavy-duty construction and innovative internal compression springs that allow for easy adjustment while installed on your vehicle.

Crafted from robust 2-inch diameter, 3/16-inch wall steel tubing, the system features a threaded bung welded near the axle and a precision CNC-machined end at the frame. The axle mount showcases BDS's enduring large-forged flex end, complete with a jam nut, ensuring durability and performance. The specially designed flex ends accommodate substantial misalignment of up to 15 degrees, promoting a smoother driving experience.

This kit employs a full floating design that facilitates bind-free performance, enabling your suspension to articulate freely throughout its full range of motion. The adjustable preload with dual-stage resistance springs ensures optimal control over axle wrap, making it possible to fine-tune performance on the fly without having to disassemble the traction bar. Each end of the traction bar comes equipped with greaseable and rebuildable features, adding convenience and longevity to your installation.

Although specific requirements include a necessary 2-inch rear bump stop extension and the exclusion of regular cab models, installation is user-friendly and should take approximately 3 to 4 hours. The bolt-on mounting brackets require only minor drilling for frame mount installation, making it accessible to any moderate skill level.

Included in the kit are the BDS121409 Recoil Mounting Kit and the BDS123409 Recoil Traction Bar Box Kit. Elevate your truck's capabilities with BDS Suspension’s expertly engineered design, delivering unmatched performance and flexibility.