null
BDS SUSPENSION

BDS SUSPENSION BDS2105FS 5.5 INCH LIFT KIT W/ RADIUS ARM RAM 3500 13-18 4WD GAS FOX 2.0 PERFORMANCE SHOCKS

(No reviews yet) Write a Review
SKU:
BDS2105FS
MPN:
BDS2105FS
Shipping:
Calculated at Checkout
  • BDS SUSPENSION BDS2105FS 5.5 INCH LIFT KIT W/ RADIUS ARM RAM 3500 13-18 4WD GAS FOX 2.0 PERFORMANCE SHOCKS
  • BDS SUSPENSION BDS2105FS 5.5 INCH LIFT KIT W/ RADIUS ARM RAM 3500 13-18 4WD GAS FOX 2.0 PERFORMANCE SHOCKS
$2,539.59

Description

Take your 2013-2018 RAM 3500 gas powered truck to the next level by installing a 5.5-inch lift kit with radius arms engineered by BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37 inch Tires.

Up front the lift kit includes gas-specific Pro-Ride coil springs, heavy duty tubular radius arms, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.

In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.

HD Radius Arms

In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.

Pro-Ride Coil Springs

A pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Fox 2.0 Performance Shocks

  • Front Lift Method: Coil Spring
  • Rear Lift Method: Blocks
  • Shocks Included: Yes
  • Front Lift Height: 5.5 inch
  • Rear Lift Height: 5 inch
  1. 6.4L gas models will require exhaust modification to clear the front driveshaft. 5.7L gas models may require exhaust modification as well. The vehicle can be driven without the front driveshaft to an exhaust shop for modifications to be made before reinstalling the driveshaft.
  2. The carrier bearing drop is necessary for models equipped with two-piece rear drive shaft.
  3. Some vehicles may require a rear driveshaft spacer kit 122007 to maintain adequate rear driveshaft engagement
  4. DRW models fit inner wheel clearance to the upper u-bolt plate on 5.5-6 inch kits
  • Heavy duty tubular radius arms improve strength, handling and caster control
  • Front high strength progressive rate coil springs for a great ride on any terrain
  • Front track bar relocation bracket to re-position axle
  • Forged drop pitman arm to correct steering angles
  • Front sway bar correction to maintain handling performance
  • HD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts
  • BDS NX2 gas or FOX performance series Internal Floating Piston gas shocks to improved ride and offroad performance

Tire Size: 37 x 12.5 Tire Size 2: 35 x 12.5 Wheel Diameter: 18 x 9 Wheel Diameter 2: 17 x 9 Back Spacing: 4.5/4.5

Kit Components:

  • Includes one BDS012516, Dodge 5 inch Rear Block Kit w/4 inch, UPC Code 658848612598
  • Includes one BDS012615, 2013-2018 Ram 2500/3500 4wd 6 inch Radius Arm Front Box Kit, UPC Code 711745611719
  • Includes one BDS032401, 2013-2018 Ram 3500 / 2014-2018 2500 Ram - Front Coils 4 inch Diesel - 5.5 inch Gas, UPC Code 658848616367
  • Includes one BDS122321, 2013-2024 Ram 2500 /2013-2024 Ram 3500 Radius Arm Box Kit, UPC Code 658848619429
  • Includes one BDS122616, Ram T-Case Index - Gas - 6 Bolt, UPC Code 658848619702
  • Includes two FOX98224752, Fox 2.0 Shock 28.25 x 17.15 x 2- S50/EB1
  • Includes two FOX98224761, Fox 2.0 Shock 33.85 x 20.75 x 2- EB1/EB1

Elevate your 2013-2018 RAM 3500 gas truck's performance and aesthetic with the BDS SUSPENSION BDS2105FS 5.5 Inch Lift Kit featuring radius arms. Crafted to enhance stance and off-road capability, this comprehensive kit offers an impressive lift that accommodates tires up to 37 inches, ensuring your truck commands attention on any terrain.

The front suspension boasts gas-specific Pro-Ride coil springs, delivering a smooth, predictable ride while enhancing ride height. Complementing this are robust tubular radius arms crafted from high-strength materials, designed to replace the factory components for improved strength and enhanced handling. A forged drop pitman arm and track bar bracket ensure optimal steering geometry, preventing unwanted steering angles and promoting a smooth driving experience.

In the rear, a fabricated lift block is combined with longer u-bolts, providing the necessary support for your upgraded suspension. The matching set of BDS NX2 Nitro or FOX 2.0 Performance shocks not only enhance ride quality but also promise unparalleled off-road performance.

This lift kit is designed with precise engineering, including features such as a track bar relocation bracket to maintain axle positioning, sway bar correction for improved handling, and a heavy-duty transmission crossmember to adjust driveline angles for smooth operation. Ideal for enthusiasts who demand more from their vehicles, the BDS2105FS kit combines functionality with durable construction.

Whether you're tackling rugged trails or cruising the highway, this lift kit transforms your RAM 3500 into a powerhouse, equipped to perform under any circumstance. Experience the ultimate upgrade in performance, ride comfort, and capability with the BDS SUSPENSION BDS2105FS Lift Kit. Unleash the full potential of your RAM and enjoy a driving experience like never before.

View AllClose

Warranty Information

Lifetime Replacement Warranty Extends to Cover all BDS Hard Parts
View AllClose

0 Reviews

View AllClose