BDS SUSPENSION BDS2103H 5.5 INCH LIFT KIT W/ RADIUS ARM RAM 2500 W/ REAR AIR RIDE 14-18 4WD GAS NX2 NITRO SHOCKS

Built to outperform, BDS Suspension engineered a 5.5-inch lift kit with radius arm for your 2014-2018 RAM 2500 gas powered truck that will surely impress. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37 inch Tires.

Up front the lift kit includes gas-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.

At this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied.

In the rear this kit utilizes heavy duty air bag spacers, track bar relocation bracket to correct axle positioning, bump stop extensions, sway bar links and a matching set of NX2 Nitro or FOX 2.0 Performance shocks. BDS also supplies new air ride leveling sensor brackets to re-position the ride height sensors allowing it to perform just like it does at factory ride height and maintain full air bag range of motion.

HD Radius Arms

In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.

Pro-Ride Coil Springs

A pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

NX2 Nitro Shocks

• Front Lift Method: Coil Spring
• Rear Lift Method: Coil Spring
• Shocks Included: Yes
• Front Lift Height: 5.5 inch
• Rear Lift Height: 4 inch

1. For OE Air Ride systems only
2. 6.4L gas models will require exhaust modification to clear the front driveshaft. 5.7L gas models may require exhaust modification as well. The vehicle can be driven without the front driveshaft to an exhaust shop for modifications to be made before reinstalling the driveshaft.

• Heavy duty tubular radius arms improve strength, handling and caster control
• High strength progressive rate coil springs for a great ride on any terrain
• Track bar relocation brackets to re-position axle
• Forged drop pitman arm to correct steering angles
• Front sway bar correction to maintain handling performance
• HD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts
• BDS NX2 gas or FOX performance series Internal Floating Piston gas shocks to improved ride and offroad performance

Tire Size: 37 x 12.5 Tire Size 2: 35 x 12.5 Wheel Diameter: 18 x 9 Wheel Diameter 2: 17 x 9 Back Spacing: 4.5/4.5

Kit Components:

• Includes one BDS012529, 14-18 Ram 2500 5 inch Rear Air Ride Box Kit, UPC Code 658848612666
• Includes one BDS012615, 2013-2018 Ram 2500/3500 4wd 6 inch Radius Arm Front Box Kit, UPC Code 711745611719
• Includes one BDS032401, 2013-2018 Ram 3500 / 2014-2018 2500 Ram - Front Coils 4 inch Diesel - 5.5 inch Gas, UPC Code 658848616367
• Includes one BDS122321, 2013-2024 Ram 2500 /2013-2024 Ram 3500 Radius Arm Box Kit, UPC Code 658848619429
• Includes one BDS122616, Ram T-Case Index - Gas - 6 Bolt, UPC Code 658848619702
• Includes two BDS85752, Shock- 27.40 x 16.20 x 2-3/8 - S50/EB2, UPC Code 711745609624
• Includes two BDS85757, Shock- 26.2 x 15.7 x 2-3/8 - Special/EB1, UPC Code 711745609662

Transform your 2014-2018 RAM 2500 into an off-road powerhouse with the BDS SUSPENSION BDS2103H 5.5-Inch Lift Kit featuring a radius arm system. Designed specifically for gas-powered models, this lift kit ensures superior stance and performance, allowing for clearance on tires up to 37 inches for enhanced capability and an impressive look.

The kit includes durable, gas-specific Pro-Ride coil springs that provide a substantial 5.5-inch lift at the front, while the rear is elevated by 4 inches. Heavy-duty replacement radius arms improve durability and handling, while a forged drop pitman arm and track bar bracket correct steering angles, ensuring that your truck handles smoothly, even on rugged terrain.

BDS prides itself on offering comprehensive solutions; hence, the package includes bump stops, brake line brackets, and precision-tuned NX2 Nitro or FOX 2.0 performance shocks for unmatched ride quality. To adjust for the lift, an indexing ring and a new transmission crossmember are also included to ensure that your factory front driveshaft works without issues.

Installation of this lift kit comes with added features, including heavy-duty airbag spacers and track bar relocation brackets, which help maintain proper axle positioning. New air ride leveling sensor brackets reposition the ride height sensors, allowing your truck to preserve its factory ride quality and full airbag motion range.

Crafted from high-tensile steel, the Pro-Ride coil springs guarantee a predictable ride across any terrain without the risk of premature coil bind. Upgrade your RAM 2500 with the BDS2103H lift kit, elevating both your truck's capabilities and aesthetics, making it ready for any adventure that lies ahead.