BDS SUSPENSION BDS2102H 6 INCH LIFT KIT W/ RADIUS ARM RAM 2500 W/ REAR AIR RIDE 14-18 4WD DIESEL NX2 NITRO

Built to outperform, BDS Suspension engineered a 6-inch lift kit with radius arm for your 2014-2018 RAM 2500 diesel powered truck that will surely impress. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37 Inch Tires.

Up front the lift kit includes diesel-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.

At this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied.

In the rear this kit utilizes heavy duty air bag spacers, track bar relocation bracket to correct axle positioning, bump stop extensions, sway bar links and a matching set of NX2 Nitro or FOX 2.0 Performance shocks. BDS also supplies new air ride leveling sensor brackets to re-position the ride height sensors allowing it to perform just like it does at factory ride height and maintain full air bag range of motion.

HD Radius Arms

In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.

Pro-Ride Coil Springs

A pair of full-length, diesel-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

• Front Lift Method: Coil Spring
• Rear Lift Method: Coil Springs
• Shocks Included: Yes
• Front Lift Height: 6 Inch
• Rear Lift Height: 4 Inch

1. For OE Air Ride systems only NX2 Nitro Shocks

• Heavy duty tubular radius arms improve strength, handling and caster control
• High strength progressive rate coil springs for a great ride on any terrain
• Track bar relocation brackets to re-position axle
• Forged drop pitman arm to correct steering angles
• Front sway bar correction to maintain handling performance
• HD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts
• BDS NX2 gas or FOX performance series Internal Floating Piston gas shocks to improved ride and offroad performance

Tire Size: 37 x 12.5 Tire Size 2: 35 x 12.5 Wheel Diameter: 18 x 9 Wheel Diameter 2: 17 x 9 Back Spacing: 4.5/4.5

Kit Components:

• Includes one BDS012529, 14-18 Ram 2500 5 Inch Rear Air Ride Box Kit, UPC Code 658848612666
• Includes one BDS012615, 2013-2018 Ram 2500/3500 4wd 6 Inch Radius Arm Front Box Kit, UPC Code 711745611719
• Includes one BDS032602, 2013-2024 Ram 3500 / 2014-2024 Ram 2500 6 Inch Coils - Diesel, UPC Code 658848616428
• Includes one BDS122321, 2013-2024 Ram 2500 /2013-2024 Ram 3500 Radius Arm Box Kit, UPC Code 658848619429
• Includes one BDS122623, 2013-2018 3500/2014-2018 2500 Ram T-Case Index- 6 Bolt, UPC Code 658848619757
• Includes two BDS85752, Shock- 27.40 x 16.20 x 2-3/8 - S50/EB2, UPC Code 711745609624
• Includes two BDS85757, Shock- 26.2 x 15.7 x 2-3/8 - Special/EB1, UPC Code 711745609662

Transform your 2014-2018 RAM 2500 diesel truck with the BDS SUSPENSION BDS2102H 6 Inch Lift Kit, designed to elevate your vehicle's performance, stance, and off-road capability. This comprehensive lift kit includes high-quality components to ensure a smooth and reliable ride on any terrain while providing ample clearance for tires up to an impressive 37 inches.

The front end features diesel-specific Pro-Ride coil springs, which offer a progressive rate for optimal ride comfort and handling. Coupled with heavy-duty, tubular radius arms, this assembly enhances strength and driving stability, all while allowing for easy caster adjustment. A forged drop pitman arm and a track bar bracket are included to correct steering angles, thus maintaining the integrity of steering dynamics even under lifted conditions.

In the rear, heavy-duty air bag spacers work in tandem with bump stop extensions and sway bar links to provide stability and enhance ride quality. The matching NX2 Nitro or FOX 2.0 Performance shocks deliver exceptional damping performance, ensuring your truck handles beautifully over bumps and rough conditions. New air ride leveling sensor brackets are also part of the kit, allowing for seamless adjustments while preserving the factory ride height characteristics.

Installing this lift kit requires some attention to detail, as the transfer case needs to be indexed to accommodate the factory front driveshaft properly. BDS has made this easier by providing an indexing ring and a new transmission crossmember.

Whether you're looking to tackle off-road adventures or enhance your truck's visual appeal, the BDS2102H Lift Kit delivers unmatched functionality and style for RAM 2500 enthusiasts. Equip your truck today and experience the difference that quality engineering can make.