BDS SUSPENSION BDS1959H 9 INCH LIFT KIT W/ 4-LINK FORD F250/F350 SUPER DUTY 20-22 4WD DIESEL WITH NX2 NITRO SHOCKS

Take your Ford Super Duty diesel truck to the next level with this 9-inch 4-Link lift kit from BDS. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 40 inch Tires.

Up front the lift kit includes diesel-specific Pro-Ride coil springs, 4-Link control arm conversion, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, bump stop extensions, stainless steel braided brake lines, NX2 steering stabilizer, and custom-tuned nitrogen charged shocks.

At this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes full replacement Glideride leaf springs to provide full lift height and increased capacity with a built in overload spring, u-bolts, brake line brackets and a matching set of NX2 Nitro or FOX Performance shocks.

4-Link Conversion

Convert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength 1/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.

Pro-Ride Coil Springs

A pair of full-length, diesel-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

T-Case Indexing

At this height, driveline adjustments are necessary to allow the use of the factory driveshafts so a precision-built transfer-case indexing ring featuring ARP-studs can clock the transfer case and improve the front driveline operating angle. Additionally, a high clearance transmission crossmember supplied to allow sufficient clearance.

• Front Lift Method: Coil Spring
• Rear Lift Method: Leaf Spring
• Shocks Included: Yes
• Front Lift Height: 9 inch
• Rear Lift Height: 8 inch

1. If equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required (BDS123402)
2. 40 x 13.50 Tires WILL require trimming.
3. Transfer case indexing ring will not fit 6.2L vehicles equipped with the 6R100 transmission.
4. If your truck is equipped with a factory rear sway bar add: 123009
5. Indexing ring has not been designed to work on manual shift transfer case models. Modification to the shift cable mount will be required.

• Easy, 100 percent Bolt-on installation
• Pro-Ride dual rate coil springs provide a remarkable ride through any terrain
• Heavy duty 4-Link control arms offer improved handling, stability, strength and caster control during wheel travel
• Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
• Fabricated steel blocks provide level stance from front to rear
• Standard NX2 Nitro shocks with vehicle-specific valving for better control
• Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road

Kit Components:

• Includes two BDS003839, 2017 F250/F350 8 inch Rear Leaf Spring, UPC Code 658848611447
• Includes one BDS013601, 2017-2022 Super Duty 4-Link Box Kit 1of2, UPC Code 658848613700
• Includes one BDS013801, 2017 Super Duty 8 inch Front Box Kit, UPC Code 658848613830
• Includes one BDS013809, 2017 Super Duty 8 inch Rear Box Kit, UPC Code 658848613847
• Includes one BDS033811, 05 Ford F250 SD Diesel 8in Coil Kit, UPC Code 658848616602
• Includes one BDS123805, 2020-2022 Ford Superduty 8 inch Transfer Case Indexing Ring Kit, UPC Code 711745612181
• Includes one BDS85431, 2017-2024 F250/F350 Single Stabilizer, UPC Code 711745609242
• Includes two BDS85721, Shock- 27.9 x 16.6 x 2-3/8 - Special/EB1, UPC Code 711745609594
• Includes two BDS85779, Shock- 35.50 x 20.40 x 2-3/8 - EB1/EB1, UPC Code 711745609778

Elevate your Ford F250/F350 Super Duty Diesel truck's performance and appearance with the BDS SUSPENSION BDS1959H 9 Inch Lift Kit featuring a robust 4-link design. This meticulously engineered lift kit is crafted for 2020-2022 4WD models, ensuring an improvement in stance, capability, and overall performance while accommodating tires up to 40 inches.

This comprehensive kit includes Pro-Ride coil springs specifically tuned for diesel models, a 4-Link control arm conversion for enhanced stability, and a forged drop pitman arm. The included track bar bracket aids in correcting steering angles, while bump stop extensions, stainless steel braided brake lines, and an NX2 steering stabilizer ensure optimal handling and safety. The high-performance NX2 nitrogen-charged shocks are engineered to provide a smooth and controlled ride across diverse terrains.

To accommodate the 9-inch lift, a precision-built transfer-case indexing ring and high-clearance transmission crossmember are included, allowing for proper factory driveshaft alignment. The rear of the truck receives full replacement Glideride leaf springs, which not only achieve lift height but also boost load capacity thanks to an integrated overload spring. With heavy-duty u-bolts, brake line brackets, and matching NX2 Nitro or FOX Performance shocks, the kit ensures a well-rounded lift solution.

Transitioning to a 4-Link system enhances suspension geometry, improving handling and durability. Each component is designed for a straightforward bolt-on installation, making it accessible for any skilled DIY enthusiast. With notable features such as dual-rate Pro-Ride coil springs and sturdy fabricated steel blocks, this lift kit is tailored for performance-driven drivers while maintaining a level stance front to back.

Transform your truck into an off-road powerhouse with the BDS1959H Lift Kit, where rugged performance meets superior engineering.