BDS SUSPENSION BDS1933FDSC 4" COILOVER RADIUS ARM LIFT KIT W/FOX DSC 2005-2007 FORD F-250/350 6.0L POWERSTROKE 4WD

Built for next level performance the BDS Suspension 4" Coilover Radius Arm Lift Kit  offers improved all-around performance, capability, and comfort in your 2005-2007 Ford F-250/350 6.0L Powerstroke 4WD. At the heart of this BDS kit is a pair of heavy-duty replacement radius arms built to withstand whatever abuse you can throw at them. Constructed from 1-3/4" OD -10GA DOM tubing with support gussets, these radius arms are far superior to the factory stamped steel units. They use a high clearance design for extra ground clearance and additional clearance of oversized tires. They incorporate factory style 3-1/4" rubber bushings to minimize road vibrations and allow for a long, maintenance-free bushing life. The arms bolt into the factory mounting points and utilize a lower cam slot to be used with the provided cam locks to correctly position the front axle and correct caster angle.

This system takes performance to the next level with FOX 2.5 Factory Series remote reservoir coilovers with DSC (dual speed compression). These bolt into place using the supplied mounting brackets and pair with a set of FOX 2.0 performance series gas shocks. To improve steering angles a forged drop pitman arm is supplied with an integrated drag link flip. Used in combination with the 1/4" thick heavy duty track bar drop bracket will position the front axle and keep the track bar angle in phase with the steering for improved handling. Also included for the front suspension are a pair of sway bar relocation brackets, bump stop extensions, brake line relocation brackets and a steering stabilizer mounting bracket.

In the rear, BDS supplies either a lift block and longer U-bolts to level the stance or replacement GlideRide leaf springs with integrated overload leaf for great all-around capability and limit any potential axle wrap. Also included are rear U-bolts, rear brake line relocation bracket and FOX 2.0 performance series gas shocks. As with all kits these include all hardware and step-by-step instructions to complete the installation. Take your Super Duty to the next level with BDS Suspension.

FEATURES:

• 4" Coilover Lift Kit

• Black E-Coated U-Bolts

• Forged Drop Pitman Arm

• Sway Bar Relocation Brackets

• Heavy-Duty Track Bar Bracket

• Brake Line Relocation Brackets

• High-Strength Tubular Radius Arms

• Choice of Lift Blocks or Rear Leaf Springs

• All Necessary Mounting Hardware Included

• Covered By The BDS "No Fine Print" Warranty

• FOX 2.0 IFP Performance Series Shocks (Rear)

• FOX 2.0 IFP Performance Series Shocks (Auxiliary)

• FOX 2.5 Factory Series Remote Reservoir Coilovers with DSC (Dual Speed Compression)

SUGGESTED WHEEL & TIRE COMBINATIONS

35x12.50 w/20x9 and 4.5" back spacing 

35x12.50 w/18x9 and 4.5" back spacing 

*trimming may be required

BDS1933FDSC

FOX DSC - 3" Leaf Spring

KIT NOTES:

These trucks were manufactured with and without top-mounted overload springs on the rear leaf springs. A top-mounted overload is an extra leaf separate from the pack that is set above the main leaf. You will need to identify which you have before ordering.

If your vehicle is equipped with a carrier bearing you will need to order BDS part # 123402.

KIT CONTENTS:

(2) BDS003609 - Ford F250/350 6in Rear Spring

(1) BDS013431 - 2005-2007 Ford F250/F350 4" Radius Arm Front Box Kit

(1) BDS123212 - 2005-2016 Ford F250/F350 Super Duty Coil-over Mount Kit (2-4in)

(1) BDS123251 - 2005-2022 Ford F250/F350 Radius Arm Kit, Pair

(1) BDS85415 - Steering Stab 23.9 x 14.3 - EB1/EB1

(1) FOX88406149 - X - Kit: BDS 05-20 Ford F250/F350 Front Coilover, 2.5 Series, R/R 4" Lift, DSC

(2) FOX98224700 - Fox 2.0 Shock 25.65 x 16.05 x 2- S50/EB1

(2) FOX98224760 - Fox 2.0 Shock 33.85 x 20.75 x 2- EB1/EB1

(4) UBT4033 - 5/8 x 3-5/8 x 12 Round U-bolt

VEHICLE FITMENT