BDS SUSPENSION BDS1945FDSC 6" COILOVER RADIUS ARM LIFT KIT W/FOX DSC 2005-2007 FORD F-250/350 6.0L POWERSTROKE 4WD

The BDS Suspension 6" Radius Arm Lift Kit is designed for improved all-around performance, capability, and comfort in your 2005-2007 Ford F-250/350 6.0L Powerstroke 4WD. At the heart of these kits are a pair of heavy-duty replacement radius arms built to withstand whatever abuse you can throw at them. Constructed from 1-3/4" OD -10GA DOM tubing with support gussets, these radius arms are far superior to the factory stamped steel units. They use a high clearance design for extra ground clearance and additional clearance of oversized tires. They incorporate factory style 3-1/4" rubber bushings to minimize road vibrations and allow for a long, maintenance-free bushing life. The arms bolt into the factory mounting points and utilize a lower cam slot to be used with the provided cam locks to correctly position the front axle and correct caster angle.

The additional height comes from a pair of full-length Pro-Ride coil springs. These springs are a direct bolt-in replacement, designed with the spring rate specific to the weight of either the diesel or gas engine while providing 6" of lift. These paired with your choice of BDS NX2 series gas shocks or the precision tuned FOX 2.0 performance gas shocks offer a smooth ride and improved control over rough terrain. To improve steering angles a forged drop pitman arm is supplied with an integrated drag link flip. Used in combination with the 1/4" thick heavy duty track bar drop bracket will position the front axle and keep the track bar angle in phase with the steering for improved handling. Also included for the front suspension are a pair of sway bar relocation brackets, bump stop extensions, brake line relocation brackets and a steering stabilizer mounting bracket.

In the rear, BDS offers a choice of lift blocks or GlideRide leaf springs. Also included are rear U-bolts, rear brake line relocation bracket and matching rear NX2 or FOX 2.0 gas shocks. As with all kits these include all hardware and step-by-step instructions to complete the installation.

FEATURES:

• 6" Lift Kit

• Forged Drop Pitman Arm

• Sway Bar Drop Brackets

• BDS Pro-Ride Coil Springs

• Radius Arm Drop Brackets

• Track Bar Relocation Bracket

• Brake Line Relocation Brackets

• High-Strength Tubular Radius Arms

• Choice Of Lift Blocks Or GlideRide Leaf Springs

• Covered By The BDS "No Fine Print" Warranty

• FOX 2.0 IFP Performance Series Shocks (Rear)

• FOX 2.0 IFP Performance Series Shocks (Auxiliary)

• Choice Of FOX 2.5 Factory Series Remote Reservoir Coilovers or FOX 2.5 Factory Series Remote Reservoir Coilovers With DSC (Dual Speed Compression)

SUGGESTED WHEEL & TIRE COMBINATIONS

37x12.50 w/20x9 and 4.5" back spacing

*trimming may be required

BDS1945FDSC

FOX DSC - w/Overload - 4" Block

KIT NOTES:

These trucks were manufactured with and without top-mounted overload springs on the rear leaf springs. A top-mounted overload is an extra leaf separate from the pack that is set above the main leaf. You will need to identify which you have before ordering.

If your vehicle is equipped with a carrier bearing you will need to order BDS part # 123402.

Do not install the 4" rear block kit on vehicles equipped with a factory 3-7/8" rear block. Only use rear spring option on these vehicles.

KIT CONTENTS:

(1) BDS013418 - 2005-2007 Ford F250/F350 4in Rear Box w/ Overload

(1) BDS013615 - 2005-2007 Ford F250/F350 4wd 6" Radius Arm Box Kit - Front

(1) BDS123251 - 2005-2022 Ford F250/F350 Radius Arm Kit, Pair

(1) BDS123612 - 2005-2016 Ford F250/F350 Coilover Mounting Kit

(1) BDS85415 - Steering Stab 23.9 x 14.3 - EB1/EB1

(1) FOX88406127 - X - Kit: BDS 05-20 Ford F250/F350 Front Coilover, 2.5 Series, R/R 6" Lift, DSC

(2) FOX98224758 - Fox 2.0 Shock 27.95 x 17.35 x 2- EB1/EB1

(2) FOX98224760 - Fox 2.0 Shock 33.85 x 20.75 x 2- EB1/EB1

VEHICLE FITMENT