BDS SUSPENSION BDS1927FPE 2.5" COILOVER PERFORMANCE ELITE LIFT KIT 2011-2016 FORD F-250/350 6.7L POWERSTROKE 4WD

Upgrade your 2011-2016 Ford F-250/350 6.7L Powerstroke 4WD with the BDS Suspension 2.5" Coilover Performance Elite Lift Kit. These kits are designed to improve performance and capability off-road while retaining great on-road handling. This kit builds on the BDS standard lift design to convert the front springs over to FOX 2.5 Performance Elite (PE) coilovers. These aluminum bodied coilovers offer improved damper performance, better heat dispersion and easy tuning via the DSC (dual speed compression) adjusters located on the reservoir allowing you to dial in the high-speed and low-speed compression settings. These coilovers come pre-tuned and fully assembled to easy installation with the provided bolt-on coilover mounting brackets.

This kit retains the factory radius arms in combination with ball joint cams to correct caster at the new lift height. The kit also includes an HD adjustable track bar to recenter the front axle, sway bar relocation brackets, bump stop extensions, U-bolt kit, and choice of rear blocks, along with FOX 2.0 Performance Series shocks at each corner. BDS designs this kit as a complete solution to transform your Super Duty to tame the any terrain. As with all BDS kits, these include Factory Protection Plus offering you a 5yr/60k-mile drivetrain warranty and no fine print warranty on the kit itself. Take your Super Duty to the next level with BDS and FOX.

FEATURES:

• 2.5" Coilover Lift Kit

• Black E-Coated U-Bolts

• Bump Stop Extensions

• Ball Joint Alignment Cams

• Sway Bar Relocation Brackets

• Brake Line Relocation Brackets

• Heavy-Duty Adjustable Track Bar

• All Necessary Mounting Hardware Included

• Choice Of Rear Lift Blocks (Or No Blocks)

• Covered By The BDS "No Fine Print" Warranty

• FOX 2.0 IFP Performance Series Shocks (Rear)

• FOX 2.0 IFP Performance Series Shocks (Auxiliary)

• FOX 2.5 Performance Elite (PE) Coilovers (Front)

Note:

Some F-250/350's come equipped from the factory with a 3-3/4" rear block and do not require a rear block kit to achieve a more level stance. If a more tail high stance is preferred, choose the 5" rear block option.

SUGGESTED WHEEL & TIRE COMBINATIONS

"35"" x 12.50"" w/17 x 9 and 5"" back spacing

35"" x 12.50"" w/18 x 9 and 5"" back spacing

35"" x 12.50"" w/20 x 9 and 5"" back spacing

*trimming may be required"

BDS1927FPE

FOX FPE

KIT NOTES:

Front bumper spacer kit may be required to run 38"x15.50"" tires.

Although extremely rare front driveline vibration may occur.

If equipped with 2-piece rear driveshaft a BDS driveshaft alignment kit (part #123406) will be required.

Front driveshaft u-joints may max out at full droop. If so, a new front shaft will be required.

If equipped with a rear sway bar, BDS end link kit (part #123009) is required.

U-bolts will not work on dually trucks.

KIT CONTENTS:

(1) BDS013254 - 2005-15 F250 2.5in Front Box Kit

(1) BDS123212 - 2005-2016 Ford F250/F350 Super Duty Coil-over Mount Kit (2-4in)

(1) FOX88406426 - Kit: BDS 05-On Ford SD Front Coilover, 2.5 Truck PES, R/R 2.5" Lift, DSC

(2) FOX98224660 - Fox 2.0 Shock 30.05 x 18.45 x 2- EB1/EB1

(2) FOX98224710 - Fox 2.0 Shock 23.27 x 14.65 x 2- S50/EB1

VEHICLE FITMENT