BDS SUSPENSION BDS1783H 6 INCH LIFT KIT W/ 4-LINK RAM 3500 13-18 4WD DIESEL 5 INCH BLOCK 8 BOLT INDEXING RING NX2 NITRO SHOCKS

Built to outperform, BDS Suspension engineered a 6-inch lift kit with 4-Link conversion for your 2013-2018 RAM 3500 diesel powered truck that will surely impress. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37 inch Tires.

Up front the lift kit includes diesel-specific Pro-Ride coil springs, 4-Link control arms with conversion mounts, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.

In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.

4-Link Conversion

Convert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength 1/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.

Pro-Ride Coil Springs

A pair of full-length, diesel-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

• Front Lift Method: Coil Spring
• Rear Lift Method: Block
• Shocks Included: Yes
• Front Lift Height: 6 inch
• Rear Lift Height: 4 inch

1. The carrier bearing drop is necessary for models equipped with the two-piece rear drive shaft.
2. Some vehicles may require a rear driveshaft spacer kit 122007 to maintain adequate rear driveshaft engagement

• Heavy duty 4-link improve strength, handling and caster control
• Front high strength progressive rate coil springs for a great ride on any terrain
• Front track bar relocation bracket to re-position axle
• Forged drop pitman arm to correct steering angles
• Front sway bar correction to maintain handling performance
• HD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts
• BDS NX2 gas or FOX performance series Internal Floating Piston gas shocks to improved ride and offroad performance

Rear Lift Option Block Kit

• 5 Inch Block: Level to tail high appearance
• Made of cast iron for high strength.
• Designed to provide correct pinion angles.

Tire Size: 37 x 13.5 Wheel Diameter: 17 x 9 Back Spacing: 5.625

Shock Option NX2 Nitro Series

• Nitrogen-charged
• Twin-tube design
• 10-stage velocity-sensitive valving
• Dual-welded ends for increased strength
• 1-3/8-inch high-flow piston
• Self-lubricating seals
• Silver powder coat finish

8 Bolt Indexing Ring

• Ram has an optional Aisin heavy-duty 6 speed transmission available in the 3500 trucks that utilize a different transfer case mounting bolt pattern (8-bolt).
• The 8-bolt kit also
• Includes an internal shaft seal extension and new shaft seal.

Kit Components:

• Includes one BDS012403, 2013-2018 Ram 3500 4-Link Box Kit (2of2), UPC Code 658848612345
• Includes one BDS012516, Dodge 5 inch Rear Block Kit w/4 inch, UPC Code 658848612598
• Includes one BDS012604, 2013-2018 Ram 3500 6 inch 4-Link Box Kit (1of2), UPC Code 658848612703
• Includes one BDS032602, 2013-2024 Ram 3500 / 2014-2024 Ram 2500 6 inch Coils - Diesel, UPC Code 658848616428
• Includes one BDS122813, 13 3500/14 2500 Ram T-Case Index- 8 Bolt, UPC Code 658848619849
• Includes two BDS85752, Shock- 27.40 x 16.20 x 2-3/8 - S50/EB2, UPC Code 711745609624
• Includes two BDS85761, Shock- 33.00 x 19.25 x 2-3/8 - EB1/EB1, UPC Code 711745609709

The BDS SUSPENSION BDS1783H 6 INCH LIFT KIT with 4-Link for 2013-2018 RAM 3500 4WD Diesel delivers unparalleled performance and stunning aesthetics for your truck. Engineered to provide a substantial 6-inch lift, this kit transforms your RAM into a formidable beast, allowing clearance for up to 37-inch tires, enhancing both its off-road capability and aggressive stance.

One of the standout features of this lift kit is the innovative 4-Link conversion. By replacing the factory stamped steel radius arms with high-strength 1/4-inch steel brackets, the kit optimizes suspension geometry, resulting in improved handling and stability. This robust setup includes diesel-specific Pro-Ride coil springs, designed for maximum lift and a smooth ride, complemented by NX2 Nitro or FOX 2.0 shocks that absorb impacts with ease.

In the rear, the kit boasts a durable fabricated lift block paired with longer u-bolts, ensuring optimal pinion angles and maintaining a sturdy setup. The inclusion of a forged drop pitman arm and a heavy-duty track bar drop bracket ensures that steering angles are corrected, allowing for a seamless driving experience, whether on the highway or rough terrain.

For vehicles with the two-piece rear drive shaft, the addition of a carrier bearing drop maintains drive shaft integrity, further enhancing your vehicle's performance. Each component in the BDS1783H kit has been meticulously designed to ensure strength and reliability, from the front sway bar correction to the high-capacity transmission crossmember.

Elevate your RAM 3500 to new heights with the BDS SUSPENSION BDS1783H lift kit—perfect for avid off-road enthusiasts seeking both performance and a striking visual upgrade. Experience the thrill of commanding the road with unmatched confidence and control.